| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic 'Tuning' an analog tape recorder to pitch
This topic is locked: you cannot edit posts or make replies.
Author Topic:  'Tuning' an analog tape recorder to pitch
Jan Dunn

 

From:
Union, NJ USA
Post  Posted 5 Jun 2002 3:23 am    
Reply with quote

Finally a simple question--simple except to me. Using a cassette tape recorder with a pitch (speed) adjustment, I can tune my tape recorder rather than play with the tuning of the guitar. Often rhythm tracks have an electroninc tuning tone or the vendor puts on a live 'E' note to get you in tune. If I run the tape into my tuner I can get a pitch reading. Here's the question. Should the tape recorder playing an E be set to 440 (its the band, right?) or to something more tempered like the guitar, say 442.5 ala Jeff Newman? I've always set the tape recorder to be producing 440 when the tuning note comes up but I never really thought it through. I'd greatly appreciate advice from you experienced folks. thank you.

Probably the smart thing to do is once I have a definitive answer, put all these old tapes I have on CD-ROM and laugh about the whole thing over a beer.
View user's profile Send private message Send e-mail
Bob Farlow

 

From:
Marietta,GA,
Post  Posted 5 Jun 2002 4:21 am    
Reply with quote

I play with rhythm tapes quite often. I always vary the speed of the player to be in tune with my guitar. The only thing that really matters is that you play in tune with the tape. No need for a tuner at all. Some rhythm tracks are on CD, which necessitates a CD player with variable pitch also. Let your ear be the deciding factor, not a tuner.
View user's profile Send private message Send e-mail
C Dixon

 

From:
Duluth, GA USA
Post  Posted 5 Jun 2002 4:46 am    
Reply with quote

I have to concur completely with Bob on this one. Adjust the speed of your tape recorder so the song is in tune with YOUR guitar.

May God bless you in your attempts,

carl
View user's profile Send private message Send e-mail Visit poster's website
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 5 Jun 2002 6:26 am    
Reply with quote

Who makes a cassette/tape player with a variable speed (pitch) control? I am in the process of making a contol (pot, resistors, voltage regulator, etc.) for my boom-box, that will vary the speed of my cassette motor. This is a project I would rather not do if there is an alternative.

Thanks for any input!!
View user's profile Send private message Send e-mail
Al Udeen

 

From:
maple grove mn usa
Post  Posted 5 Jun 2002 8:18 am    
Reply with quote

Tom! I recently bought a small Sony cassette recorder, with a speed contol, at Kmart for 29.95 It works great!model # TCM-200v Its also very good for recording live music! Regards! au
View user's profile Send private message Send e-mail
David Weaver

 

From:
Aurora, CO USA
Post  Posted 5 Jun 2002 8:25 am    
Reply with quote

Tom...

Most of the rack players (Tascam, etc). have pitch control. May be a little harder to find on boom box style. Same is true of pitch control and the A-B buttonfor CD a player. Probably need to go to a rack mount or at least an entry level home-studio model to get pitch control on a CD player.

Look into some rack systems if you have a budget you can work with. Nice stuff is available in rack mount at reasonable cost. I use mine every day and I love it.
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 5 Jun 2002 9:39 am    
Reply with quote

moved to "Electronics' section
View user's profile Send private message Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron