| Author |
Topic: Thinking of selling one of my Legrande 3 Sd10's |
Don Hinkle
From:
Springfield Illinois, USA
|
Posted 11 Jan 2012 5:14 pm |
|
I am thinking of selling one of my Emmons Legrande 3 guitars. If my memory serves me, this is a 2010 model.
I was told, and I believe this guitar is standard height. It is the same height as my other LG3 as well.
I am 2nd owner. I bought it off of the forum here and had to send it to Emmons for a complete work over.
It was missing many parts including the entire 1/2 stop assembly. There were numerous other things wrong with this guitar as well.
I sent it to Emmons and have a complete repair invoice with everything that was done to it.
This guitar was put back to "factory standards as it was when it left the factory". Ron even told me that he was putting a "new guitar warranty" on it.
I will include repair invoice which will serve as guitar warranty papers as well.
guitar has 4 pedals & 6 knee levers.
standard emmons setup
Raise & lower E's on Left knee
LKV lowers b's 1/2 step
RKL raises strings 1 & 2, drops 6 whole step
RKR Eb to d on 1/2 stop, full drop to c#. & drops 9th string down to C# also.
2nd lkl isnt hooked up to any bellcranks - knee lever is there.
I also had Emmons install a brand new 108N pickup.
This comes with emmons case.
The guitar is in great shape as you would expect.
The only flaws that my eyes can see is a small part of the fretboard lamination (close to pickup near 1st string) has pulled up (was like that when I bought it and hasnt gotten any worse), and if you look at the pad (where a C6 neck would go on a D10) there is a small scratch. Its not a cut, just a scratch in the material. Its not very visible, nor is it a big deal but I am trying disclose everything.
I took a picture of the pad with the light just right so it would make the small scratch really STAND OUT.
Guitar sounds and plays just like you know that it should.
It has had 3 hours played on it since I got it back from emmons.
With options - this guitar is 3600 from emmons.
3200.00 + shipping
_________________
Emmons Legrande III SD10
Emmons Legrande III D10
Session 400
Fender guitars
Fender amps |
|
|
 |
Charlie Shifflett
From:
Colorado City, Texas, USA
|
Posted 12 Jan 2012 8:43 am Emmons 1573d
|
|
Hello Don
That is a nice looking guitar and good luck on your sale I just wish I had the extra cash it would be on its way to my house.regards Charlie
_________________
Charlie 1969 Emmons p/p 8/5 old pevey ltd400
Thanks |
|
|
|
Don Hinkle
From:
Springfield Illinois, USA
|
Posted 19 Jan 2012 6:51 pm
|
|
Yes - its a wonderful guitar!!!
_________________
Emmons Legrande III SD10
Emmons Legrande III D10
Session 400
Fender guitars
Fender amps |
|
|
|
Rocky Evangelisti
From:
Perth, Western Australia
|
Posted 5 Feb 2012 4:59 pm Emmons LeGrande 111
|
|
Hi Don, how are the 4 pedals arranged? Do you have the rod/s to set up the 6th knee lever.
Would you consider shipping the Emmons to Australia?
Many thanks. |
|
|
|
