90 degree adaptor for Boss power supply ?

Larry Dahl · From: Melbourne, FL USA

I have been trying to find a source for a 90 degree adaptor for a Boss wall wart. The unit has a straight plug, and would like to save that room on a pedal board. For that matter, I would also be interested in jacks, plugs, jumper cords, ect.

Kevin Milner · From: Los Angeles, California, USA

I did a quick search and found these:

http://www.musiciansfriend.com/guitars/godlyke-power-all-c-y-r-cable-y-right-angle-splitter-cable/h78233000000000?src=3WFRWXX&ZYXSEM=0&CAWELAID=1105659799

http://www.musiciansfriend.com/guitars/godlyke-power-all-cable-black-r-right-angle-extension-cable/150282000000000

The latter is probably exactly what you're looking for!
_________________
GFI S10-P Ultra -> Milkman 40w Pedal Steel Mini or 300w Half & Half (or Sarno SGBB/Nashville 112 or '94 Twin Amp or Homebuilt 5e3)
Effects: Cali76-CD Compressor -> EP booster -> Sarno Earth Drive -> Earthquaker Devices Zap Machine -> Earthquaker Devices Grand Orbiter Phaser -> Caitlinbread Dirty Little Secret Mk III -> Malekko Envelope Filter -> Hilton VP -> Pedal Projects Klone -> Tech 21 Blonde -> Strymon Timeline -> TC Electronics Spark Mini Boost -> Strymon Lex -> Strymon Flint

Clete Ritta · From: San Antonio, Texas

I use an iSpot to power my SBK board which powers all pedals with 9v. Short 6" L-jack jumper cables between each. Theres a daisy chain power cable connected as well as individual 9v cables from the SBK. Works fine.

Clete

Larry Dahl · From: Melbourne, FL USA

Thanks for the replies to my question about the adaptors for the wall warts. These will solve the problems.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: