| Author |
Topic: Digitech RP155 question... |
Dick Sexton
From:
Greenville, Ohio
|
Posted 15 Dec 2011 5:46 pm |
|
Can one of you guys in the know tell me again how to make an RP150 setting files compatible with and usable in an RP155. Exactly and by the numbers would be preferable. Thank you very much...
I think I've slipped a cog. I thought I had it down! |
|
|
 |
Joe Hensley
From:
Boise, Idaho, USA
|
Posted 15 Dec 2011 6:07 pm
|
|
Hi Dick. There are a couple of things that need to change, the "RP150" in the file name needs to change to "RP155" and then the document needs to be edited in Notepad to change the occurrences of "RP150" to "RP155" there too.
I've had to change some files to make them compatible with my RP155. If you still need assistance feel free to send me your files and I can change them for you - make sure they're working with my set up - and email 'em back to you.
In fact, it was some of your files from your SkyDrive that I used (Thread here: http://bb.steelguitarforum.com/viewtopic.php?t=188121&highlight=)
So thank you very much too! |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
Posted 15 Dec 2011 6:18 pm Thank you...
|
|
Just want to make sure I have it...
1. Change the name of the file from DELAY.rp150p to DELAY.rp155p
2. Open same the file in "Notepad", and change any and all references of RP150, to RP155. Save the file.
3. Done and usable on the RP155?
Last edited by Dick Sexton on 15 Dec 2011 6:30 pm; edited 1 time in total |
|
|
|
Joe Hensley
From:
Boise, Idaho, USA
|
Posted 15 Dec 2011 6:20 pm
|
|
That should do it Dick. Again, if you have any problems, I'd be happy to email some files back-and-forth.
If I remember correctly, it's just the last line that needs to be changed to this:
</RP155Preset>
Last edited by Joe Hensley on 15 Dec 2011 6:24 pm; edited 1 time in total |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
Posted 15 Dec 2011 6:23 pm Thank you...
|
|
| Thanks Joe, really appreciate it. |
|
|
|
