| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Rock N Soc seats
Goto page 1, 2  Next
Reply to topic
Author Topic:  Rock N Soc seats
Gary Reed


Post  Posted 21 Nov 2011 4:22 pm    
Reply with quote

Is anyone using this seat?
If so, how's it doing?

http://www.rocnsoc.com/nitro-throne.html
View user's profile Send private message Send e-mail
Roger Crawford


From:
Griffin, GA USA
Post  Posted 21 Nov 2011 4:29 pm    
Reply with quote

I use one with a back rest when I play drums. I've never tried it with steel, but it should be very comfortable. For gigging, I'd miss the storage of a pac-a-seat.
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 21 Nov 2011 5:03 pm    
Reply with quote

The Storage Steelers Seats have only one height. I thought having an adjustable might be a good thing. It's for only this reason I'm considering something other than a Steel Seat.
Thanks!
View user's profile Send private message Send e-mail
Joe Naylor


From:
Avondale, Arizona, USA
Post  Posted 21 Nov 2011 5:57 pm    
Reply with quote

Gary I build steelseat and offer adjustable legs on all models.

they are leveling type of dual purpose up to 1 3/4" adjustable plus they work on stages that are not level

my email is joe.naylor@att.net

Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 21 Nov 2011 6:09 pm    
Reply with quote

Hi Joe,
Sounds Good.
Can you direct me to the 'site page' that has a picture of this feature?
View user's profile Send private message Send e-mail
Joe Naylor


From:
Avondale, Arizona, USA
Post  Posted 22 Nov 2011 10:23 am    
Reply with quote

I do not have them on my site yet but here is a photo







Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
View user's profile Send private message Send e-mail
Mark van Allen


From:
Watkinsville, Ga. USA
Post  Posted 22 Nov 2011 2:59 pm    
Reply with quote

I've always been convinced it's always good to sit at the same height at the steel- once you figure it out, it's nice to have a seat the exact right height.
We were talking about seats the other night at a gig and the drummer asked me if a typical drum throne wouldn't turn back and forth uncomfortably when using knee levers... I never thought about it since I've been using steel seats for 30 years... but seems like that might be a problem.
View user's profile Send private message Send e-mail Visit poster's website
Gary Reed


Post  Posted 22 Nov 2011 3:10 pm    
Reply with quote

Mark - I never would have thought of that until it was too late.
Joe - Those leg extensions should do nicely.
Thank you both!
View user's profile Send private message Send e-mail
Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 22 Nov 2011 6:30 pm    
Reply with quote

I use a drum throne. Roc and Soc
Adjustable like and old time piano stool. And lockable once you find the height you like.

This one locks in place so it won't spin, if that is what you want.
Has a backrest.(optional of course)

It is just a very sturdy comfy seat. It does not store anything!
That's what a small duffel bag is for.

R2
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 22 Nov 2011 6:58 pm    
Reply with quote

Roc & Soc also has a hydraulic, but that one may swivel. (Not sure)
The locking feature would be the model to choose.
View user's profile Send private message Send e-mail
Joe Naylor


From:
Avondale, Arizona, USA
Post  Posted 22 Nov 2011 8:02 pm    
Reply with quote

I have had a couple customers that have different height steels which is the reason they ordered.

Another one uses it for a keyboard which needs to be higher than when he plays steel.

Lots of reasons I guess. I have had several that say they got rid of their drum throne because a steelseat is more comfortable.

The cushion on my seats (standard) are firm - some like soft cushions. Everything has pluses and minuses - the trade off is firm cushions are better for Most Backs. The softer the foam the quicker will ware out but some people like a soft cushion.

Just things I have heard and read about foam and steelseats.

Customers are with seats just like other things - some like Fords and some like Chevys.

My 2 cents worth from what I have heard and read.

Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
View user's profile Send private message Send e-mail
Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 23 Nov 2011 2:41 am    
Reply with quote

http://www.musiciansfriend.com/roc-n-soc?catId=site1DF&source=3WWRWXGB

This is a link to the manual spindle drum throne. One can lock in the height so that can remain constant everytime it is setup.
It can also be locked so that it will not turn.

Hope this helps.
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 23 Nov 2011 8:50 am    
Reply with quote

I used to use a Gretsch hydraulic drum throne for many years. The spinning of the seat was not a problem when using the knee levers. I only went to a steel seat when the hydraulic oil started leaking out of the drum stool.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Scott Henderson


From:
Camdenton, Missouri, USA
Post  Posted 23 Nov 2011 9:47 am    
Reply with quote

Joe do you offer just the adjustable leg inserts?
_________________
D-10 JCH Dekley U-12 D-8 Magnatone Mullen RP Evans RE 200 profex 2 BJS bars
Dentyne gum (peppermint)
View user's profile Send private message Send e-mail
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 23 Nov 2011 10:36 am    
Reply with quote

Joe Naylor wrote:
Quote:
I do not have them on my site yet but here is a photo

That can be rectified!
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 23 Nov 2011 11:25 am    
Reply with quote

Quote:
That can be rectified!


Don't tell me his seats also have a rectifier in them. Whoa! Whoa!

Or did you mean they have a butt warmer... You know... A rectum fire Laughing Laughing
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Cal Sharp


From:
the farm in Kornfield Kounty, TN
Post  Posted 23 Nov 2011 11:39 am    
Reply with quote

Quote:
Or did you mean they have a butt warmer.

There ya go, Joe. Another option.
_________________
C#
Me: Steel Guitar Madness
Latest ebook: Steel Guitar Insanity
Custom Made Covers for Steel Guitars & Amps at Sharp Covers Nashville
View user's profile Send private message Send e-mail Visit poster's website
chris ivey


From:
california (deceased)
Post  Posted 23 Nov 2011 12:12 pm    
Reply with quote

rectum, hell..damn near killed 'em! (punchline to old joke)

joe, great leveler idea. yeah..if you could just sell the inserts..?
View user's profile Send private message
Gary Reed


Post  Posted 23 Nov 2011 9:17 pm    
Reply with quote

Richard Sinkler:

Do you miss the drummers throne or is the Steeler Seat your choice now?
BTW: You have a cool website. Looks like you have some steel time invested!
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 23 Nov 2011 10:04 pm    
Reply with quote

The pak-a-seat is the way to go. Thanks on the website.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Joe Naylor


From:
Avondale, Arizona, USA
Post  Posted 24 Nov 2011 5:43 pm    
Reply with quote

Scott - I had not been on here for a while - but the adjustable leg inserts will not fit on standard seats, more correctly the legs would not fold up correctly.

I make special legs and have to mount them different also.

Now the seat heater - well since I live in the desert we need a seat chiller - I have been ask to line the inside to make an ice chest - does that count???

I have not been asked YET for the seat heater - most everthings you can think of ----- and More than most can think of.

I think I have more options than most if not all - and still get surprised what some ask for.

Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 24 Nov 2011 9:37 pm    
Reply with quote

Sorry Joe, a cold butt ain't no good fer me. Now if you could work in a hand warmer on each side of the seat so we could warm our hands on those freezing outdoor gigs, you will make somewhere in the tens of dollars on your seats. Laughing Laughing Laughing
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Joe Naylor


From:
Avondale, Arizona, USA
Post  Posted 24 Nov 2011 10:33 pm    
Reply with quote

I have not been at this long enough to know that when EVERYONE wants one I ususally spend more developing the option that I make back in 5 years - but this must be fun because I keep doing it.

But after the 5 years I DO expect to make some where in the 10's of dollars.

Very Happy

Thanks for the smile

Joe Naylor
www.steelseat.com
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 26 Nov 2011 7:49 pm    
Reply with quote

Scott Henderson wrote:
Joe do you offer just the adjustable leg inserts?


Scott:
Maybe Joe could do a retro fit for you if you sent the seat to him or explain how to install new legs on an old seat that Joe shipped to you.
View user's profile Send private message Send e-mail
Gary Reed


Post  Posted 26 Nov 2011 7:53 pm    
Reply with quote

Joe,
What is the additional cost to have the metal handles instead of the black 'amp stye' ones?

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron