| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Is this caused by CABINET DROP?
Reply to topic
Author Topic:  Is this caused by CABINET DROP?
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 14 Nov 2011 4:46 pm    
Reply with quote

Saw the pix of the Sho-Bud that's for sale here on the SGF. Couldn't help but notice the cracked end plate.

Was that caused by cabinet DROP?

After many years of being curious, after nearly a dozen trips to prominant national steel guitar shows,
I got my first opportunity last week to actually play three different models/years of Sho-Bud steel guitars.

I found them to be really nice.......but over the years, I've constantly been 'warned' about the inferior pedal systems.

WHY might that be?
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 14 Nov 2011 5:41 pm    
Reply with quote

Quote:
Saw the pix of the Sho-Bud that's for sale here on the SGF. Couldn't help but notice the cracked end plate.

Was that caused by cabinet DROP?


Laughing Laughing Laughing Laughing Laughing Laughing Laughing
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting.
View user's profile Send private message Send e-mail
Billy Gilbert

 

From:
Texas, USA
Post  Posted 15 Nov 2011 7:13 am     cabinet drop
Reply with quote

My first experience with cabinet drop occurred about 15 years ago. A friend had his pedal steel set up on it's legs in the back of a mini-van. His wife made a quick trip to the store and when she got back the screws were stripped on both end-plates. The sides of the cabinet were made of partical board and couldn't stand the pressure of going around corners on 2 wheels. He brought it to me, even tho I had never even touched a pedal steel before, and asked me to fix it. I drilled out the screw holes and glued in some birch dowels, cut them off flush, drilled some pilot holes and put it back together. I don't remember the brand, but it had a 25" scale.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 15 Nov 2011 11:27 am    
Reply with quote

The warnings (personally I wouldn't warn so much as caution) stem from the changer being a touch primitive.
By modern standards they feel clunky.
Whatever. It's the price you pay for Sho-Bud tone. If had the cash, I'd pay it.
Of course some folks sell modernized Buds, ISTR Bobbe had one for 13K.
(And some folks mistakenly call R&B "single raise, single lower", giving the impression of limitations, when the number of pulls per string is limited only by the number of crossroads/racks)
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 15 Nov 2011 12:10 pm    
Reply with quote

Rack and barrel -- the TRUE universal changer.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron