| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Fender 800 knee lever demo audio clip....
Reply to topic
Author Topic:  Fender 800 knee lever demo audio clip....
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 30 Oct 2011 1:57 pm    
Reply with quote

No great playing here, and crap sound... I laid the $1.99 computer mic on the floor and recorded it into the 60 second computer sound recoder.. No eq, no nothing...
I just went through a little chordal movement, and used all 4 knee levers that are on my guitar...


LKL- pulls string 1 F# up a full tone..

LKR- Pulls string 2 down a full tone in 2 steps...

My second string is an E, just so you know.. You will hear the change, plain as day.

RKL- Strings 4 and 8 up a half[F lever]

RKR- Strings 4 and 8 up 1/2... [E to F]...

This clip is not designed to highlight my decidedly journeyman/honkytonk level steel playing, nor extol the virtues of the Fender sound.. It is designed to let guys hear how well and accurately this new Fender knee lever system works, using changes that guys were using on pedals with these guitars.. I didn't move the bar much... much of what you hear is levers actuated with the bar stationary.

Again, don't expect "the big sound".. It ain't gonna happen with the technology I wield!
bob
http://soundcloud.com/spongebob-7/untitled-2
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......


Last edited by Bob Carlucci on 30 Oct 2011 2:05 pm; edited 1 time in total
View user's profile Send private message
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 30 Oct 2011 2:03 pm    
Reply with quote

btw, I can post further clips, using more specific changes, if anyone is thinking of adding a lever or 2 to a Fender cable job.....
if anyone cares, let me know, and I'll get more stuff on... May even record a part of a song or two... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......


Last edited by Bob Carlucci on 30 Oct 2011 2:05 pm; edited 1 time in total
View user's profile Send private message
Russ Tkac


Post  Posted 30 Oct 2011 2:04 pm    
Reply with quote

Very nice bob, sounds great and seems to work very well!
View user's profile Send private message Send e-mail
Dennis Olearchik

 

From:
Newtown, PA
Post  Posted 31 Oct 2011 6:22 am    
Reply with quote

very nice Bob!

I'd like to put these levers on an old 400 I have sitting around.

looking forward to more news about them.
View user's profile Send private message
Fred Glave


From:
McHenry, Illinois, USA
Post  Posted 31 Oct 2011 7:55 am    
Reply with quote

Sounds very nice Bob. Sign me up, I'd like to get 4 for my 2000.
_________________
Zum Encore, Zum Stage One, Fender 2000, Harlan Bros., Multi-Kord,
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 31 Oct 2011 2:04 pm    
Reply with quote

They will be available soon.. the builder already has the first several units spoken for...
bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 31 Oct 2011 2:39 pm    
Reply with quote

Very nice Bob. Killer tone for sure. Makes me wish I had a Fender so I can add the levers.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 31 Oct 2011 5:12 pm    
Reply with quote

I'd like one for my 2000 but I think the cable length would be a little bit longer. Does he have the measurements?

The audio sounds great. What amp are you using?
Dave
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 31 Oct 2011 5:18 pm    
Reply with quote

Dave Zirbel wrote:
I'd like one for my 2000 but I think the cable length would be a little bit longer. Does he have the measurements?

The audio sounds great. What amp are you using?
Dave


Dave.. he can make cables to your measurement... Just use a string figuring in the changer loop, and turnbuckle... He will have no trouble making cables and levers for the 2000...

Thats an old tube Traynor Studio Mate reverb,, 4x 8 speakers! about 20 watts... I posted some other clips as well.. turned the amp treble down on those , and the guitar didn't sound as good... Fenders want treble!... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 31 Oct 2011 5:51 pm    
Reply with quote

I actually love the sound of my 2000 through my Webb and my ShoBud amp, both solid state. It sounded good through a Super reverb w/15" JBL too. The Deluxe Reverb sounded a little too shrill for me with the 2000.
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
View user's profile Send private message Send e-mail
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 31 Oct 2011 6:06 pm    
Reply with quote

Gives me a bit of Sneaky Pete memories with that tone. Really nice.
_________________
To write with a broken pencil is pointless.
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 1 Nov 2011 1:23 am    
Reply with quote

Tom Wolverton wrote:
Gives me a bit of Sneaky Pete memories with that tone. Really nice.

Actually Tom, I can get that sound much better using a Fender amp... I have an old traynor set up here near the steel and I use that for messing around with the steel, and dialing it in, but an old Fender amp really brings out the distinctive "Fender sound" much better . bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 1 Nov 2011 8:08 am    
Reply with quote

I don't remember Sneaky Pete ever having that good of a tone. One of the things I didn't like about him WAS his tone.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 1 Nov 2011 2:03 pm    
Reply with quote

Richard Sinkler wrote:
I don't remember Sneaky Pete ever having that good of a tone. One of the things I didn't like about him WAS his tone.

Yikes... Thats what I LOVED about old Pete... That tone of his was magic.
Well. like they say,one mans meat is another mans poison... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Russ Tkac


Post  Posted 3 Nov 2011 10:20 am    
Reply with quote

I think Sneaky had some pretty nice tone here.

http://youtu.be/8lf2CNbcj5Q
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron