| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Pics of Fender cable guitar modular lever system..
Goto page 1, 2, 3  Next
Reply to topic
Author Topic:  Pics of Fender cable guitar modular lever system..
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 25 Oct 2011 4:41 pm    
Reply with quote

These were sent to me with thanks for starting to spread the word.. Various levels of production, folded and unfolded, painted and unpainted.. Remember, this system is modular, and nothing is screwed into any part of the guitar, unless it was a pulley expansion, and even that uses the original Fender factory holes.. NO drilling anywhere.,,,




_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......


Last edited by Bob Carlucci on 25 Oct 2011 4:56 pm; edited 1 time in total
View user's profile Send private message
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 25 Oct 2011 4:49 pm    
Reply with quote

more...






_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 25 Oct 2011 4:53 pm    
Reply with quote

and again...



_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 25 Oct 2011 5:12 pm    
Reply with quote

Impressive
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 25 Oct 2011 6:01 pm    
Reply with quote

Too cool. Maybe I'll keep the 2000 I was thinking of selling. Very Happy
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps


Last edited by Dave Zirbel on 25 Oct 2011 7:10 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 25 Oct 2011 6:47 pm    
Reply with quote

Notice the levers tuck way down.. No problems fitting in the stock fender case with this design.. Lever clearance in the case was always a big problem for these guitars.This was the first of many problems that was resolved when this retro fit lever system was designed... guy does great work... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Russ Tkac


Post  Posted 25 Oct 2011 6:51 pm    
Reply with quote

Leo lives! Smile
View user's profile Send private message Send e-mail
Bob Muller


From:
Oregon, USA
Post  Posted 25 Oct 2011 11:39 pm    
Reply with quote

Very nice, looks like it could be an original factory set up!!
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 26 Oct 2011 2:00 am    
Reply with quote

I had one knee lever on the 2000 that I had. It was custom made by Sho-Bud for me. I just used one of the existing cables for the knee lever.
View user's profile Send private message Send e-mail
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 26 Oct 2011 8:05 am    
Reply with quote

Don't know anything about the fender guitars but that looks to be a ten string. Is it standard E9th and can the new lever setup do lower? Good looking rig.
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail
Bruce Hilton


From:
Berwick, Maine, USA
Post  Posted 26 Oct 2011 11:12 am    
Reply with quote

Just what the doctor ordered!! Can't hardly wait til they're available! My 1000 sounds amazing, but without knee levers many of the tabs and instructional materials become difficult to translate.

And Dave, if you really DO decide to sell that 2000... give me a shout!! Smile
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 26 Oct 2011 12:04 pm    
Reply with quote

I don't know about this one, but my Fender 2000 was set up with E9th/C6th on it.
View user's profile Send private message Send e-mail
Roger Shackelton

 

From:
MINNESOTA (deceased)
Post  Posted 26 Oct 2011 1:58 pm    
Reply with quote

The Fender 800 & 2000 model guitars are set up for double raises & double lowers. Smile
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 26 Oct 2011 2:19 pm    
Reply with quote

Henry Matthews wrote:
Don't know anything about the fender guitars but that looks to be a ten string. Is it standard E9th and can the new lever setup do lower? Good looking rig.


Yes, its a model 800 S10, not an easy find. Standard E9.... I have mine set up to lower string #2 down a full tone in two steps, as with any other steel, and strings 4 and 8 each down a half, as with an other E9 copedent.
One caveat..
The Fender changer does not like lowers as well as raises, and the throw is longer than with a modern changer.. thats just the way they are.
That can be altered by using a string gauge .001 heavier than standard E9 .. Its no big deal, unless you want the same ultra short throw as a modern changer..

If that's the case an old Fender is probably the wrong guitar.

I have found I adjust to the longer sweep on lowers quite readily.. I have had similar issues on old Bud changers as well.. Your body adjusts...bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Igor Fiksman


From:
Georgia, USA
Post  Posted 26 Oct 2011 6:19 pm    
Reply with quote

Do you have a source for extra cable assemblies?
_________________
SHO-BUD Professional SD-10 Black, SHO-BUD Pro III Custom D-10 Red, Goodrich Matchbox 6A, Steeler's Choice seat, Quilter Steelaire Amps.
View user's profile Send private message Send e-mail
Russ Tkac


Post  Posted 26 Oct 2011 6:34 pm    
Reply with quote

Very cool bob and you seem really happy with the 800! That is great news. You are a fine player and one worthy to keep an old Fender alive and kicking.Very Happy

Russ
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 27 Oct 2011 1:03 am    
Reply with quote

Igor Fiksman wrote:
Do you have a source for extra cable assemblies?


Yes, he will be offering new replacement cables, and they are of better quality than Fender originals... They will come with slack adjusters similar to the originals. I think he has some in stock already, but I am not 100% sure.
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Scott Shipley


From:
The Ozark Mountains
Post  Posted 27 Oct 2011 1:42 am    
Reply with quote

Excellent work. Makes me wish I had my old 400 back, THANKS! Sad
_________________
Scott Shipley Facebook
View user's profile Send private message Send e-mail Visit poster's website
Fred Glave


From:
McHenry, Illinois, USA
Post  Posted 27 Oct 2011 7:32 am    
Reply with quote

Bob, Please let us know when these are available. I want to play my 2000 so bad, but the makeshift knee levers are just not good.
Thanks!
_________________
Zum Encore, Zum Stage One, Fender 2000, Harlan Bros., Multi-Kord,
View user's profile Send private message Send e-mail
Bruce Hilton


From:
Berwick, Maine, USA
Post  Posted 27 Oct 2011 9:01 am    
Reply with quote

Any plans for a double raise/lower bridge assembly for 400 and 1000 models?
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 27 Oct 2011 2:28 pm    
Reply with quote

Bruce Hilton wrote:
Any plans for a double raise/lower bridge assembly for 400 and 1000 models?

I can't answer that, but at the prices he would have to charge to tool up for something of that magnitude, you could buy a few mint condition Fenders for the price of the changer.
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Jim Sliff


From:
Lawndale California, USA
Post  Posted 27 Oct 2011 7:12 pm    
Reply with quote

What Bob said regarding a double raise/lower changer for a 400. It would require complete tooling - there's not anything similar (the 800/2000 changers are not just wider, there are an assortment of dimensional differences.

The usual method of handling double raises and lowers on a 400 or 1000 is use of Shobud barrel tuners and some sort of stop on a cable or a drill stop fixed on the cable and an adjustable stop on the guitar (Sneaky Pete's setup). Either one work great and is a breeze to install. The toughest part is the soldering (and the right solder - NOT electrical solder!).

Bob, is your guy going to have just turnbuckles and/or small pulleys available? Those are the two most-requested items I hear about. There are substitute turnbuckles but they are real clunky looking and only small boat pulleys or self-machined units. The ones used on your guitar look wonderful!
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 28 Oct 2011 1:33 am    
Reply with quote

He makes the turnbuckles, and the small pulleys in house.. He cuts and bends the springs on the turnbuckles, and they work great. I imagine he will offer the turnbuckles alone without the cables, if he gets requests for them. The turnbuckles on my levers are knurled brass, and the threaded hook is hardened steel... They are smaller in diameter than the fender units, but the cable diameter is the same. I don't think he would have a problem making up replacement turnbuckles. His pulleys are small, unobtrusive and ultra precision. Light years ahead of anything I have seen available in hardware stores. Everything on my guitar can be reproduced. Remember, he had this guitar a long time, measuring, making blueprints, and getting his stock and equipment geared to make this stuff. From what I know of him , he is going to be very willing to work with " do it yourself" guys that own Fenders which is most of us. I am sure he is watching this thread with interest... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Chris Lucker

 

From:
Los Angeles, California USA
Post  Posted 28 Oct 2011 1:54 am    
Reply with quote

Jim
You do not need to settle for the clunky cast turnbuckles. Slender turnbuckles are off the shelf items at such places as gen-aircraft-hardware.com in the Los Angeles Area, or easy to machine starting with hex stock and LH and RH taps and dies. You do not need the hex stock if you can knurl. These look like the aircraft parts, but they are easy to make on a lathe, especially if you use brass for the body of the turnbuckle.
on one 400 I modified with ten pedals I eliminated the hooks and mounted the cables to the cranks the way Bigsby did it using a clevis and yoke cable end. The cable fixed at the yoke through a hollow screw that threaded into the yoke. That screw also adjusted the tension. A ball end could be used to keep the fix the cable inside the yoke, but I did like Bigsby and simply soldered or crimped a short length of tubing on the end of the cable.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars.
View user's profile Send private message Send e-mail
Mark Fasbender

 

Post  Posted 6 Feb 2012 3:26 am    
Reply with quote



Last edited by Mark Fasbender on 13 Aug 2012 2:08 am; edited 1 time in total
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron