| Author |
Topic: Eliminate The Reverb Tank |
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 5 Oct 2011 8:21 pm |
|
Does the Session 400 Limited still function normally if the reverb tank is unplugged and reverb pot dialed fully left?
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
 |
Bob Tuttle
From:
Republic, MO 65738
|
Posted 6 Oct 2011 11:01 am
|
|
| Yes...... |
|
|
|
Mike Taylor
From:
Wetumpka, AL
|
Posted 6 Oct 2011 7:00 pm
|
|
I did that with my LTD 400 as well as turned it Off using the footswitch.
Mike |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 6 Oct 2011 7:11 pm
|
|
I'm wanting to make sure that unplugging it won't have an adverse effect without the load resistance and burn out some circuits long term. Or, cause hum, etc.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
Bryan Daste
From:
Portland, Oregon, USA
|
Posted 7 Oct 2011 1:03 pm
|
|
| I did this with a Peavey Special 130 a while back, with no problems. |
|
|
|
