| Author |
Topic: Cleaning a Sho-Bud Pro 1 changer |
Dan Najvar
From:
McDade, TX
|
Posted 29 Sep 2011 7:34 am |
|
| Hello everyone! Recently I have been thinking about selling my 74-75 3 x 1 (no decal)Pro 1. It has been sitting in the case for about 3 1/2 years now. Last night I got her out and began evaluating what it would take to get her ready to sell and I have decided that the changer is gonna have to come apart to give it a good cleaning. Could/Would any of you who have done this mind giving me a step by step method for disassembly/reassembly? What kind of parts cleaner is the best for this job? Just looking at the under carriage would make many of you cringe in horror so I have my work cut out for me!! Thank you for any help!! |
|
|
 |
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 29 Sep 2011 9:29 am
|
|
Dan shoot me an email, I'll help ya. shobud"at"windstream.net
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
Bent Romnes
From:
London,Ontario, Canada
|
Posted 29 Sep 2011 2:00 pm
|
|
Dan, Go to a bicycle repair shop and buy a spray can of degreaser. You were gonna take the changer off, right?
The grease and dirt will just run off it.
Let dry and re-lube.
_________________
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/ |
|
|
|
Tom Wolverton
From:
Carpinteria, CA
|
Posted 29 Sep 2011 2:24 pm
|
|
Probably best to stay away from bike lubes that contain wax.
_________________
To write with a broken pencil is pointless. |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 29 Sep 2011 2:34 pm
|
|
Lynn Stafford turned me onto using carburetor cleaner. It comes in a 1 gallon can with a dip basket and is usually sold at automotive stores.
Load the basket with the gnarly parts, lower it into the solution, remove in 20-30 min, then rinse and dry. The parts will be pristine. |
|
|
|
Bent Romnes
From:
London,Ontario, Canada
|
|
|
|
John Billings
From:
Ohio, USA
|
Posted 29 Sep 2011 5:18 pm
|
|
Tony,
You're using the same thing as I use. Works great!
JB |
|
|
|
Dan Najvar
From:
McDade, TX
|
Posted 30 Sep 2011 5:23 am
|
|
| Thank you everyone! I spoke with James yesterday and he lined me out. I got the guitar completely disassembled last night. It took me about 2 hours on account of all the pictures I took! Things were pretty nasty in there. My hands looked like I was rebuilding an old engine! I have my work cut out for me this weekend. I will post some before and after pics when complete. |
|
|
|
