| Author |
Topic: Mullen measurments needed |
Kevin Bollivar
|
Posted 31 Aug 2011 5:45 am |
|
I just purchased a Mullen SD-10......it hasn't arrived yet,and I have a chance to buy an ata case for it,but I need the L x W x H measurments of the guitar,in order to know if it is a good fit.Odd question I know,buy hey,I'm sure there have been stranger questions on the forum!!
Thanks for time 
_________________
CARTER SD10,77 SESSION 400,81 VEGAS 400 STEELER'S CHOICE SIDE KICK,GOODRICH L10K VOLUME,PETERSON STROBO HD,GOODRICH MATCHBOX 7A,GEORGE L CABLES,BJS BAR,NATIONAL PICKS |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 31 Aug 2011 6:10 am
|
|
I have a D10 pre RP. If yours is an SD10, a single neck on a double frame, they should be the same dimension.
Mine measures 32" X 10 1/2" X 5 1/2" [height from bottom of body to top of Grover tuning keys E9 neck.] |
|
|
|
Steve Whetstone
From:
Burnt Prairie, Illinois, USA
|
Posted 31 Aug 2011 6:30 am
|
|
I have a new SD-10 RP sitting here that I just measured.
I got 32 x 10 1/4 x 5 1/4.
Bottom line is, I agree with Jerry.
Steve |
|
|
|
Kevin Bollivar
|
Posted 31 Aug 2011 7:21 am
|
|
Thanks guys 
_________________
CARTER SD10,77 SESSION 400,81 VEGAS 400 STEELER'S CHOICE SIDE KICK,GOODRICH L10K VOLUME,PETERSON STROBO HD,GOODRICH MATCHBOX 7A,GEORGE L CABLES,BJS BAR,NATIONAL PICKS |
|
|
|
Joe Naylor
From:
Avondale, Arizona, USA
|
Posted 31 Aug 2011 8:04 am call Mullin
|
|
Check with Del he will give you the correct ones out of his head.
Joe Naylor
www.steelseat.com
plus Road Cases and other stuff too
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP |
|
|
|
Alan Michael
From:
Winston-Salem North Carolina U.S.A.
|
Posted 31 Aug 2011 8:10 am
|
|
| Could some of you RP owners tell me the height from floor to top of guitar on a standard height pedal steel. I recently bought a used RP and it feels like it may be a little tall for me. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 31 Aug 2011 8:57 am
|
|
| Mine's not a Royal, but it measures staight up from the floor to the bottom center of the endplates about 25 3/4" and right at 30" at string level, front neck. That should be real close to standard Mullen height, I think. |
|
|
|
