| Author |
Topic: How do I wire 2 Alumitone P/U's on a D10 using a Switch? |
Dave Wheelhouse
From:
Southampton, Hampshire, United Kingdom
|
Posted 14 Aug 2011 1:00 am |
|
Hi guys,
Please Help, if anyone knows how to wire up my 2 alumitone's on a D10 (new build) this is with a Sho-Bud/gibson type 3 possition P/U switch. This switch has 4 tabs/lugs on one end & 1 tab/lug on the opposite end, Diagrams would be greatly appreciated.
Kind regards,
Dave. 
_________________
SHEFFIELD D10 9+8, Bradshaw Webb 614-E, Pro-Fex 2, Hilton electronic volume pedal & Sheffield tone bars. |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 14 Aug 2011 8:10 am
|
|
Hi Dave. The Mullen site has a wiring diagram for a D10 in their pdf manual. Pg. 17. if you want to take a couple minutes to download it. http://www.mullenguitars.com/ownersmanual/ownersmanual.pdf The switch is of the on/on/on style.
The AT wiring uses orange for hot side. Twist green and black together for ground. Hope this is helpful. |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 14 Aug 2011 9:36 am
|
|
Disregard the volume & tone pots Dave if you don't have them
Red is hot +
Black is ground -
Yellow that comes out of the switch goes to tip of jack / is hot too +
 |
|
|
|
Dave Wheelhouse
From:
Southampton, Hampshire, United Kingdom
|
Posted 16 Aug 2011 8:36 am
|
|
Thanks for your help guys hopefully it will be sorted soon.
Dave. 
_________________
SHEFFIELD D10 9+8, Bradshaw Webb 614-E, Pro-Fex 2, Hilton electronic volume pedal & Sheffield tone bars. |
|
|
|
