Author |
Topic: Boss RV3 needs repair |
Fuzzy Plant
From: Winter Haven, Florida, USA
|
Posted 9 Jun 2011 7:33 am
|
|
My RV3 became a problem as the switch stopped working. So, I then ordered a replacement switch from Roland, It worked for a short time and then stopped suddenly. Is it really worth having it repaired, if it is possible, or should I look for another one? Does anyone out there do those repairs? I'm at a loss. HELP!
Fuzzy |
|
|
![](templates/respond/images/spacer.gif) |
Tim Heidner
From: Groves, TX
|
Posted 9 Jun 2011 10:51 am
|
|
you could send it to the BOSS repair shop in Los Angeles, check their website, they also show a list of authorized repair shops. |
|
|
![](templates/respond/images/spacer.gif) |
Papa Joe Pollick
From: Swanton, Ohio
|
Posted 9 Jun 2011 11:21 am
|
|
I have a Boss pedal that needs repair..I contacted Boss and learned it was just as cheap to replace it..They could take a lesson from Peavey on customer care.. |
|
|
![](templates/respond/images/spacer.gif) |
Fuzzy Plant
From: Winter Haven, Florida, USA
|
Posted 9 Jun 2011 11:44 am
|
|
Thanks guys, I kinda thought it might be wiser to buy a new one. I've been looking at the Behringer
DR400. Know anybody who has one of them? If it's comparable to the Boss,or even real close, I just might get one of them; the price is great.
Thanks again guys! Fuzzy |
|
|
![](templates/respond/images/spacer.gif) |
Malcolm McMaster
From: Beith Ayrshire Scotland
|
Posted 9 Jun 2011 12:17 pm
|
|
I have one that I have used for a couple of years with no problem.It sounds as good as my friend's DD3, but much cheaper.The only problem that I have been told about is that once you have a problem with it you just throw it away as you cannot get them repaired, but then again for what you pay you can afford to do that. _________________ MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case. |
|
|
![](templates/respond/images/spacer.gif) |
Tom Wolverton
From: Carpinteria, CA
|
Posted 9 Jun 2011 1:40 pm
|
|
I think analogman.com can fix them. _________________ To write with a broken pencil is pointless. |
|
|
![](templates/respond/images/spacer.gif) |
Fuzzy Plant
From: Winter Haven, Florida, USA
|
Posted 11 Jun 2011 8:53 am
|
|
Thanks to y'all for your input. I thank Malcolm for his imput especially. I believe it's the smartest thing to do (buy the Behringer DR400). So, I just ordered it for $36.40 new.
Fuzzy
BOB: Please close this thread, and thank you! |
|
|
![](templates/respond/images/spacer.gif) |
Mike Wheeler
From: Delaware, Ohio, USA
|
Posted 12 Jun 2011 10:52 am
|
|
Fuzzy, I sent you an email. Did you get it? _________________ Best regards,
Mike |
|
|
![](templates/respond/images/spacer.gif) |
Fuzzy Plant
From: Winter Haven, Florida, USA
|
Posted 12 Jun 2011 12:49 pm
|
|
I just sent you a reply on email. |
|
|
![](templates/respond/images/spacer.gif) |
Fuzzy Plant
From: Winter Haven, Florida, USA
|
Posted 13 Jun 2011 6:46 am close this thread
|
|
BOB; Please close this thread. Thanks! |
|
|
![](templates/respond/images/spacer.gif) |
Kevin Mincke
From: Farmington, MN (Twin Cities-South Metro) USA
|
Posted 13 Jun 2011 7:26 pm
|
|
I had real good luck with repair on a couple BOSS pedals, and very reasonable!
ROLAND FACTORY SERVICE
4901 Alexander St.
Los Angeles, CA 90040
(323) 890-3740 |
|
|
![](templates/respond/images/spacer.gif) |