| Author |
Topic: Nashville 112 Recommended Settings |
Roy Thomson
From:
Wolfville, Nova Scotia,Canada
|
Posted 18 Apr 2011 7:34 am |
|
I have a student waiting on his Nashville 112 to
arrive.
He has asked me to assist him with the settings.
I would appreciate any help on this because I am
not familiar with this amp although I know it is a
popular choice for Steelers.
Any suggestions?
Roy
_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel |
|
|
 |
Dave O'Brien
From:
Florida and New Jersey
|
Posted 18 Apr 2011 8:13 am Nv112
|
|
It comes with a manual of suggested settings for different instruments - that would be a good place to start. The NV112 is a very friendly little guy.
_________________
Dave O'Brien
Emmons D-10, CMI D-10, Fender Deluxe Reverb, PV 112, Fender Pro Reverb
www.myspace.com/daveobrienband |
|
|
|
Roy Thomson
From:
Wolfville, Nova Scotia,Canada
|
Posted 18 Apr 2011 8:54 am
|
|
Thanks Dave!
I'll pass that along.
_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel |
|
|
|
Roger Dillingham
From:
Kentucky, USA
|
Posted 18 Apr 2011 6:37 pm Nashville 112 Settings
|
|
Roy, for what it's worth I have found that Michael Douchette's recommended settings for the NV112 are exactly perfect to my ear! If you don't know Mike, he is one of Nashville's finest PSG players and has done years of studio work as well as tons of live performances on the "road" with some of the most famous C&W stars. Mike has a great touch and definitely knows what "quality steel" should sound like! I think anyone would do well to listen closely to his comments or suggestions. JMHO Original post from 2009 listed below:
Hope this helps you as it did me! Roger 
From:
Gallatin, TN Posted 6 May 2009 9:17 pm
--------------------------------------------------------------------------------
What are the "Peavey settings?" Try:
Bass 11
Mid -9
Shift on the "8" of 800
Treble and Presence at 0
Start there...
_________________
Mikey D... H.S.P.
http://www.myspace.com/michaeldouchette
http://www.rmanashville.com
http://www.nashvillemusicpros.com/profile/MichaelDouchette
http://www.thesessionplayers |
|
|
|
Andy Sandoval
From:
Bakersfield, California, USA
|
Posted 19 Apr 2011 5:03 am
|
|
 |
|
|
|
Roy Thomson
From:
Wolfville, Nova Scotia,Canada
|
Posted 19 Apr 2011 7:51 am
|
|
Great help fellas!!
More than a start for my student.
Many Thanks.
Roy
_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel |
|
|
|
Bent Romnes
From:
London,Ontario, Canada
|
Posted 19 Apr 2011 12:35 pm
|
|
Roy, also try this. It works good for single coil and some humbuckers:
turn the Master gain up to about 8
then use the pre-gain to set the volume you like. I leave mine at 2 to 3 for practicing
Turn the mid all the way off
shift at 8 of the 800
Play with the remaining knobs til you get the tone you like
_________________
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/ |
|
|
|
Sam White R.I.P.
From:
Coventry, RI 02816
|
Posted 22 Dec 2012 4:48 pm
|
|
Roger that is the settings Ray Walker used and has mine set the same way and it is real nice with the RV-3.
Sam White
_________________
Dynalap lap 8 String Lap Steel Fender frontman 25B speaker changed Boss TU-12H Tuner.Founder and supporter of the Rhode Island Steel Guitar Association Founder of the New England Steel Guitar Association and the Greeneville TN Steel Jams and now founder of the North Carolina Steel Guitar Jams. Honorary member of the Rhode Island Steel Guitar Association,Member of The New England Steel Guitar Association.
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association |
|
|
|
