| Author |
Topic: Jerry Roller, Master Steel Tech |
Jack Ritter
From:
Enid, Oklahoma, USA
|
Posted 21 Feb 2011 1:08 pm |
|
Had Jerry Roller work on my Zum and Lg2, just brought them home Friday and they both work and perform like new. Put on a new 2nd string raise assembly on LG2 E9 and made mechanical adjustments on both including some stiff and no end play cross shafts on the Zum and got them all working like they did when new.
Thank you Jerry for your knowledge, expertise, and dedication. You certainly are a steel guitar Master Tech and a fine gentleman!
Jack
_________________
Zum D10 8x5,rev pre-amp, TC M300, Split 12, n-112, IZZY, Hilton vp, Geo L, BJS Hughey, Live Steel |
|
|
 |
Don Hinkle
From:
Springfield Illinois, USA
|
Posted 21 Feb 2011 3:32 pm
|
|
I have bought a couple of small things (volume pedal, pickup) from Jerry, I have also called him on the phone for advice and spent close to an hour on the phone (several times).. he is a very good guy... VERY patient, very honest...
Don
_________________
Emmons Legrande III SD10
Emmons Legrande III D10
Session 400
Fender guitars
Fender amps |
|
|
|
Bobby Boggs
From:
Upstate SC.
|
Posted 21 Feb 2011 8:58 pm
|
|
Jerry is a master tech and wonderful human being. I understand he plays good also. I hope to get to hear him one day. If only on YouTube.
bb |
|
|
|
Bill Myrick
From:
Pea Ridge, Ar. (deceased)
|
Posted 22 Feb 2011 3:10 am
|
|
Well----- I don't know ---- here's an LDG he worked on for me --
Coarse, here it as after he finished it ! - 
 |
|
|
|
