Author |
Topic: made the switch to .022W |
Bob Hoffnar
From: Austin, Tx
|
Posted 17 Feb 2011 8:46 am
|
|
After screwing around with that squirrely 6th st for the last 20 years I decided to try a wound .022. I realized that I only have a half step raise on it so I had nothing to lose by checking it out. It is a major relief ! I really like it so far. Had do do a little balancing of the changer and get used to a different feel. Not so bad compared to a string that is stable. _________________ Bob |
|
|
|
John Groover McDuffie
From: LA California, USA
|
Posted 17 Feb 2011 9:58 am
|
|
.024w here! |
|
|
|
John Neff
From: Athens, GA
|
Posted 17 Feb 2011 10:12 am
|
|
I used a wound 6th years ago on my old MSA. It was more stable. I switched to the plain .020 partly because "that's what the pros use" and because the wound string was a little quiet. I've been thinking about trying it again, now that I can compensate with the Tonealigner. |
|
|
|
Ken Metcalf
From: San Antonio Texas USA
|
Posted 17 Feb 2011 4:12 pm
|
|
22w on the ZB made all the difference from unmanageable to manageable. _________________ MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes |
|
|
|
Jim Palenscar
From: Oceanside, Calif, USA
|
Posted 17 Feb 2011 8:05 pm
|
|
As long as you don't lower it a full step it is great. Lowering it a full step on most guitars makes for a very long throw and it is difficult to time properly with other changes on the same pedal/lever. |
|
|
|
Mark van Allen
From: Watkinsville, Ga. USA
|
Posted 17 Feb 2011 9:32 pm
|
|
Yeah, what Jim said. That's why I stick with the .022 Plain. I really like the Whole step drop, would really miss it. |
|
|
|
James Morehead
From: Prague, Oklahoma, USA - R.I.P.
|
Posted 17 Feb 2011 9:38 pm
|
|
Jim Palenscar wrote: |
As long as you don't lower it a full step it is great. Lowering it a full step on most guitars makes for a very long throw and it is difficult to time properly with other changes on the same pedal/lever. |
"Most" is the the keyword. I get a fulltone lower out of some of the single/single changer 'buds I set up. I use Jagwire "Ricky Davis" series with a 22 wound of course. _________________ "Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
Jim Palenscar
From: Oceanside, Calif, USA
|
Posted 17 Feb 2011 10:40 pm
|
|
It's not that they can't be lowered a full step- it's just that a wound 22 going down a full step makes for a long throw and a very tough split to G. |
|
|
|
Georg Sørtun
From: Mandal, Agder, Norway
|
Posted 18 Feb 2011 1:49 am
|
|
I recently switched from SIT to Jagwire Lloyd Green Arist Series on a Dekley and a GFI Ultra - .022w for 6th.
I lower 6th and 3d string a whole step in parallel on lever, and split for half-step lower with B pedal engaged. Probably couldn't have used wound 6th if I've had split-screws in changer, but no problem with split-rods.
Timing and split work perfect on both PSGs, and the GFI has a lot less audible "body-drop" detuning with .022w for 6th. The (original) Dekley is perfectly stable, and sounds better than ever with the overall slightly heavier strings. |
|
|
|
Randy Gilliam
From: San Antonio, Texas, USA
|
Posted 21 Feb 2011 8:25 pm 22w
|
|
I am Gonna Try a 22 wound . I Would Like to Hear the Difference!Randy G. |
|
|
|
Larry Bressington
From: Nebraska
|
Posted 21 Feb 2011 9:08 pm
|
|
I ran wound 22 for years and went back and forth on wound and plain, i finally settled on a .20 plain, it took the 'bong'out of the 22 plain slightly, and stayed in tune better even though it is lighter.
I could not convince myself that a lighter string would help especially on a sho-bud. I currently been using those D'addario XL pro steels, work wonderfully. _________________ A.K.A Chappy. |
|
|
|