| Author |
Topic: G# to G Lower, how many of you have it? |
Dickie Whitley
|
Posted 6 Jan 2011 6:01 pm |
|
...
Last edited by Dickie Whitley on 30 May 2013 5:12 pm; edited 1 time in total |
|
|
 |
Mike Perlowin
From:
Los Angeles CA
|
|
|
|
Ben Lawson
From:
Brooksville Florida
|
Posted 6 Jan 2011 7:33 pm
|
|
| I've had that change since '77 and I use it a lot. |
|
|
|
Brint Hannay
From:
Maryland, USA
|
Posted 6 Jan 2011 7:36 pm
|
|
I find the change very useful. I have it on a knee; one use I like is dropping to the G from the A+B pedals position, for the seventh, which wouldn't work smoothly on a pedal.
(ex.: 5th fret A+B D major, release pedal B->G lower for D7. Also release A+B->G lower for D->Am, or vice versa Am->D.) |
|
|
|
Ryan Barwin
From:
Hamilton, Ontario, Canada
|
Posted 6 Jan 2011 8:16 pm
|
|
I have the 6th string whole tone lower split with the B pedal to get a G. I use it a lot. It gets the same note as the change you're talking about, but there's things I use it for that wouldn't work on a pedal. I also like having the A on string 3. (I also raise string 1 to G on that lever).
_________________
www.pedalsteel.ca |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 7 Jan 2011 3:20 am
|
|
Nope. Used to almost 40 years ago, but found other better sounding alternatives that allowed me more useful (in my opinion)changes for the knee lever (actually, I had it on a floor pedal on my first ZB with 5 pedals). Like Ryan, I have the split on string 6, and also have my LKV lever raising strings 1 & 6 to G to get the minor or the Dom7th.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Jerry Hayes
From:
Virginia Beach, Va.
|
Posted 7 Jan 2011 8:11 am
|
|
I only have it on string 3. I'm into the "Mooney" sound and I think you need it for that. My zero pedal raises my 7th string F# to G# and lowers my 3rd string G# to G. On some things I when going from the I to the IV chord on strings 3,4 and 5, I like to use the zero and A pedal instead of the usual A & B pedals, a nice sound......JH in Va.
_________________
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!! |
|
|
|
Doug Beaumier
From:
Northampton, MA
|
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 7 Jan 2011 8:45 am
|
|
I like this change (G#'s > G's).
On my Universals I lower all 3 G#'s to G.
No split-tuning requiered.
I haven't tried the G#>F# split with the B-pedal, so I can't address that one, but...
A few of my G#>G observations include... If you come from a guitar playing background, this change puts all your open-position E9th Minor chords at the same frets they would be on guitar.
Note: The A+B position Minor chords will be in the same place as on guitar if you use A+B+[B>Bb], which typically requiers split-tuning for the resuting C note.
A+[G#>G] = the 7th chord of the A+B.
If you like Scales/Modes you can use this pedal or lever to play the Major scale using Chords (Do-Re-Mi=etc), I-ii-iii-IV-V-vi-dimVii-I (also on the same frets as guitar).
If you play an E chord at the 3rd fret with A+F, one fret up with only G#>G is EMaj7th.
You can basically use it to replace your C-pedal... instead of pressing your C pedal slide up 2 frets with G#>G.
At some point it might be useful if we make a vid of the uses of both the G#>G and the G#>F# functions, as they are both kinda non-standard. |
|
|
|
