| Author |
Topic: Shipping Problem |
David Dixon
From:
Gadsden, Alabama
|
Posted 26 Dec 2010 11:34 am |
|
I recently shipped an LDG to Texas. I played the guitar for about 4 hours the night before shipping. When the guitar arrived, the A pedal would not come up to the correct C# pitch. What are the corrections to this shipping issue?
Butch Dixon
_________________
77 Emmons Push Pull, Emmons Legrande II Nashville 400 (Mod), Nashville 400 (Fox Mod) Walker Stereo Steel, TC Effects, BJS Bar |
|
|
 |
rpetersen
From:
Iowa
|
Posted 26 Dec 2010 12:28 pm
|
|
Probably just tune it unless there is something visibly wrong?
_________________
Ron Petersen |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 26 Dec 2010 9:57 pm Shipping Problem
|
|
| If the carton or case were not damaged in shipping it was something in with the guitar. In shipping the Steel, it was shook, jurked and bounced around being hauled and traveling on conveyor belts. I would check for a string end and ball being shook loose and caught in the linkage or changer. Good luck And Happy Steelin |
|
|
|
Stuart Legg
|
Posted 26 Dec 2010 10:15 pm
|
|
| When you put pressure on the bottom of a pedal (pushing the pedal up instead of down) or something hitting the bell crank with the same results, it will force the bell crank off the stop making tuning impossible until corrected. Usually just get it back where it stays on the stop and adjust. |
|
|
|
