I need A wiring Diagram,for A (3)plug Good rich 120 volume

Raymond White · From: Georgia, USA

could some one give me some help on this?it is an older goodrich 120,instead of having the standard type plugs/jacks,it has the black square type jacks,some of the poles are loose i;mgetting a dead short.please note which is the hot poles and which are ground poles,and how to connect it all together,with these square black jacks,i can;t tell whot hot or gound,Many thanks,Ray White,Email me at (steelmanplayer@yahoo.com).......also the 3 plugs on the pot,which is hot, which is ground........

Jack Stoner · From: Kansas City, MO

I don't recall Goodrich ever using those types of jacks. They always used the "open" Switchcraft on everything I've seen or worked on.

This might help you figure out the wiring.

http://www.gregcutshaw.com/Goodrich%20120%20Pot/Goodrich%20120%20Pot.html

Michael Robertson · From: Ventura, California. USA

I just changed the volume pot in my Goodrich 120 yesterday and to my surprise the ¼” jacks were those square black plastic. I would have never thought they used them either.
This link might help as well.
http://www.gregcutshaw.com/Goodrich%20120%20Pot/Goodrich%20120%20Pot.html

Michael Robertson · From: Ventura, California. USA

Raymond if it would help I can take some pictures of the inside of my G120 and show you the wiring.
I doubt I will do it tonight but if you like I can do that for you.

Michael Robertson · From: Ventura, California. USA

Raymond I got your Email.
Pictures have been sent……… Hope it helps.
Let me know.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: