| Author |
Topic: Nylon for pedal stops |
Larry Johnson
From:
Tennessee, USA
|
Posted 21 Sep 2010 1:23 pm |
|
Where can I find some Nylon in a round stick? I need it for the end of my pedal stop ,adjusting screw. I can't try plastic because the pressure will break it.
I tried True Value hdwe. but no luck. The screw ,an 8/32 was drilled off center, thereby missing the pedal arm alltogether. Larry J. |
|
|
 |
David Hartley
|
|
|
|
Larry Johnson
From:
Tennessee, USA
|
Posted 22 Sep 2010 4:46 am Nylon for pedal stops
|
|
Hi David,The nylon tipped screws won't work ,because my screw was drilled off center .I can't use a nylon acorn nut because it is off centered and will try to pull off centered.
I am not trying to quiet noise but to make a dead stop on an off centered screw.
It was suggested that I take 2 nuts and put them on and lock them together. Thanks ,Larry |
|
|
|
