RV-3 setting

Joe Blount · From: Hattiesburg, Mississippi, USA

For the one's who use a RV-3, what settings do u use

Bob Tuttle · From: Republic, MO 65738

Balance......8 o'clock
Tone.........11 o'clock
R.Time.......1 o'clock
Mode.........7

Ken Metcalf · From: San Antonio Texas USA

I run on 6 with the other 3 knobs set way down at 7-8 o'clock
Bal 8 o'clock
Tone 8 o'clock
R time 7 o'clock

The Fox amp I use with this set up is a very bright amp, so your mileage may very.

Just try the settings 4-7 for reverb and delay.
then play with the knobs to figure it out.
It helps immensely if you know what each knob is for and then you will need to experiment to get the settings you like.

In different modes the knobs do different things.
To keep it simple in modes 4-7.
The Balance is how much effect you have.
The Tone or Feed back is how many echos or repetitions.
D. Time is how long the echo is between echos.
reverb time is fixed.
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes

Clete Ritta · From: San Antonio, Texas

Balance.....Barely on*
Tone.........Barely on (this is your repeat control using mode 7)
R.Time......Variable (usually around 11 to 1 o'clock, but I often have this off and use a dedicated delay pedal.
Mode.........7

I use mine in an effects loop, where generally the balance control is set lower than if run in-line.

Clete

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: