| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic First Post:: I need a new Lap Steel
Reply to topic
Author Topic:  First Post:: I need a new Lap Steel
Michael Eastman

 

From:
California, USA
Post  Posted 11 Jul 2010 4:51 pm    
Reply with quote

Although I've been playing guitar for 40 something years I've never really given the lap steel a chance. I currently have a late 40's, early 50's Rick 6 string that's been sitting around doing nothing so I'm giving it go. The problem with the guitar is that the tuners a shot and keeping it in tune consumes a lot of time. Regardless, I would like to purchase an 8 string (that would do 6 string duty too). I'm not ready to drop a big wad on something "high end" and would like to look more towards the entry level market without venturing into the "crap" level.

If you have any suggestions or need a little more info from me... let's get started!
View user's profile Send private message Send e-mail
Ron Whitfield

 

From:
Kaaawa, Hawaii, USA
Post  Posted 11 Jul 2010 5:20 pm    
Reply with quote

Welcome aboard, Michael
Here's a DynaLap that didn't sell on eBay.
Maybe you can contact the seller and get it for even cheaper.
These are probably the best value going. Low price/high end sound.

Good luck!
View user's profile Send private message Send e-mail Visit poster's website
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 11 Jul 2010 9:24 pm    
Reply with quote

Maybe you can get some new tuners from Stewart-MacDonald and get the old guitar working. They have a site and a catalog available.
I believe it's stewmac.com
View user's profile Send private message Send e-mail
Michael Eastman

 

From:
California, USA
Post  Posted 11 Jul 2010 9:46 pm    
Reply with quote

Thanks for both the replies. I may just go the new tuner route but I do want to get a new "toy". I'm going to give it another day or 2 and see what other suggestions come up before I pull the trigger one way or another.
View user's profile Send private message Send e-mail
Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 12 Jul 2010 5:55 am     Elderly
Reply with quote

Michael, if you haven't already, you might want to take a look over at Elderly Music:

http://www.elderly.com/

They usually have some new 8-stringers at a good price as well as a nice selection of used and vintage instruments.

HTH.
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website
Delvin Morgan


From:
Lindstrom, Minnesota, USA
Post  Posted 12 Jul 2010 7:42 am    
Reply with quote

Like Ron said, the Dynalaps are topnotch. I have one and the tone will amaze you. Run it through a small tube amp, and wow, old time sound.
View user's profile Send private message Send e-mail
Tom Pettingill


From:
California, USA (deceased)
Post  Posted 12 Jul 2010 7:55 am    
Reply with quote

Always worth checking out the Instruments for sale section, Bill Moore has an early Dynalap for sale here
http://bb.steelguitarforum.com/viewtopic.php?t=187670
_________________
Some misc pics of my hand crafted steels
Follow me on Facebook here
View user's profile Send private message Send e-mail
Peter Jacobs


From:
Northern Virginia
Post  Posted 12 Jul 2010 8:00 am    
Reply with quote

I can also highly recommend Randy Cordle at www.bluestemstrings.com. He makes a great quality steel for a mid-range price, and his split coil pickups sound great.

Welcome to the forum!
_________________
Peter
---------
www.splinterville.com
YouTube: https://www.youtube.com/@splinterville6278/videos
View user's profile Send private message Send e-mail
Brick Spieth

 

From:
San Jose, California, USA
Post  Posted 12 Jul 2010 11:38 am    
Reply with quote

I'll bet Jim Palanscar of steel Guitars of North County (San Diego) could have your Rick up and running in no time. Give him a call.
View user's profile Send private message Send e-mail
Gary Stevenson


From:
Northern New York,USA
Post  Posted 12 Jul 2010 6:46 pm     8-string
Reply with quote

I have a 8-string lap steel with a Jerry Wallace pickup.If interested I can email pics.I am asking $300.00 plus shipping
View user's profile Send private message Send e-mail
Travis Hillis

 

From:
Nashville TN, USA
Post  Posted 12 Jul 2010 7:58 pm    
Reply with quote

The Peavey Powerslide is a great axe and only $200.
You can even play it standing up.
Then again, I bet that Rick would sound great with new tuners.



Smile
View user's profile Send private message
Michael Eastman

 

From:
California, USA
Post  Posted 12 Jul 2010 10:01 pm    
Reply with quote

Brick Spieth wrote:
I'll bet Jim Palanscar of steel Guitars of North County (San Diego) could have your Rick up and running in no time. Give him a call.


Although I do plan on purchasing a new guitar I will definately check out his business. I searched around for a set of new tuners but all the specs I was seeing told me nothing was going to fit.
View user's profile Send private message Send e-mail
Michael Eastman

 

From:
California, USA
Post  Posted 13 Jul 2010 7:24 am    
Reply with quote

Delvin Morgan wrote:
Like Ron said, the Dynalaps are topnotch. I have one and the tone will amaze you. Run it through a small tube amp, and wow, old time sound.

So you're saying it would sound good through one of these? Whoa!
I guess I may have just found a use for it. It's been sitting around just doing nothin'



Last edited by Michael Eastman on 13 Jul 2010 7:45 am; edited 2 times in total
View user's profile Send private message Send e-mail
Peter Jacobs


From:
Northern Virginia
Post  Posted 13 Jul 2010 7:40 am    
Reply with quote

Whoa!
_________________
Peter
---------
www.splinterville.com
YouTube: https://www.youtube.com/@splinterville6278/videos
View user's profile Send private message Send e-mail
Paul M. Matthews


From:
New Jersey, USA
Post  Posted 13 Jul 2010 9:18 am     Re: First Post:: I need a new Lap Steel
Reply with quote

Michael Eastman wrote:
Although I've been playing guitar for 40 something years I've never really given the lap steel a chance. I currently have a late 40's, early 50's Rick 6 string that's been sitting around doing nothing so I'm giving it go. The problem with the guitar is that the tuners a shot and keeping it in tune consumes a lot of time. Regardless, I would like to purchase an 8 string (that would do 6 string duty too). I'm not ready to drop a big wad on something "high end" and would like to look more towards the entry level market without venturing into the "crap" level.

If you have any suggestions or need a little more info from me... let's get started!


IMHO Bob Allen makes a top of the line Lap Pro 8 for about $250-$300. I have one and love it. You choose the wood, pickups, stain, knob location etc. It comes with a bag and chord too. He also sends you emails of his progress on your baby. Here is his web site: http://www.musonmt.com/4.html
Good Luck!!
_________________
I want to Steel it all.....
View user's profile Send private message Send e-mail
Ron Whitfield

 

From:
Kaaawa, Hawaii, USA
Post  Posted 13 Jul 2010 10:16 am     yikes...
Reply with quote

[quote="Michael Eastman
[/quote]
No Michael, that will not do at all! You should send it to me and get it out of your hair...
View user's profile Send private message Send e-mail Visit poster's website
Keith Cordell


From:
San Diego
Post  Posted 13 Jul 2010 10:41 am    
Reply with quote

That amp is probably my Holy Grail for lap steel. I could never afford it, and they sound magnificent. That guitar and this amp should be as good as it gets for someone starting out- some of us lifelong addicts don't have it that good.
View user's profile Send private message Send e-mail
Mark Lavelle


From:
San Mateo, CA
Post  Posted 13 Jul 2010 4:20 pm    
Reply with quote

Travis Hillis wrote:
The Peavey Powerslide is a great axe and only $200.

...if the design doesn't cause you to have seizures! Winking

Am I the only one who thinks that is a seriously ugly guitar?

-- Mark
_________________
http://www.harmonicappliances.com/
View user's profile Send private message Send e-mail Visit poster's website
Keith Cordell


From:
San Diego
Post  Posted 13 Jul 2010 4:32 pm    
Reply with quote

Agreed. Fugly in a horrid, poison-esque way... but nearly a perfect design. I hate pointy guitars and it took me over a year to finally buy one. I want one in each color now. They are extremely useable, I have even grown accustomed to the weird pickup blend setup. the single coil side sounds like a tele pickup in a champion, the bucker side and most of the travel of the pot sound very fat, not at all twangy and very "Johnny Winter", if you can dig... ahem...
I want to replace the bridge and nut for something a bit more solid but it is a great guitar for the money. You'd pay that for an Indonesian Squier Stratocaster...
View user's profile Send private message Send e-mail
Travis Hillis

 

From:
Nashville TN, USA
Post  Posted 13 Jul 2010 4:54 pm    
Reply with quote

Yeah that ^


It looks better in person. When I first saw it online I didnt like it. But its VERY useable has a nice sound and great finish. My only issue is that a bit more sustain would be nice.


At least its unique...
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron