| Author |
Topic: Sierra parts |
Gary Webb
From:
New York, USA
|
Posted 6 Jul 2010 6:12 am |
|
| Does anyone know where I might get some Crown series parts? A LKR kit would be great.I have tried contacting Tom at Sierra but don't have much luck with that.I also need some replacement screws,the ones for the keyless changers the allen head is about stripped. Gary Webb |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 6 Jul 2010 6:32 am
|
|
Can't help with the kl kit, but if you mean the allen head screws that locks the string down when you install it, they are a standard size. I believe 6-32 by about 3/8 to 1/2 inch long.
Take one to your local hdwe. store and they can probably match it up. They're available in black.
Mine's cased up right now, but I can dig it out and get the exact dimensions if you need 'em. |
|
|
|
Gary Cosden
From:
Florida, USA
|
Posted 6 Jul 2010 6:33 am
|
|
| I was able to find exact replacement screws for the keyless tuners on my Session guitar at Ace Hardware. They have a good selection of allen keys as well. |
|
|
|
Glyndon Woosley
From:
LaGrange, Kentucky, USA
|
Posted 8 Jul 2010 6:40 am
|
|
I have a session keyless and I'm wondering if there would be any advantage to putting a brass washer under the screw head that holds the strings, (just a thought). Also I have been looking at the adjustment thumbscrews and I "think" they may be an odd size. I had one that was bent slightly, but I managed to straighten it. A spare would be nice.
_________________
Sierra Session D10, Rickenbacker, Fender, Session 400, Classic 30, Harke |
|
|
|
Cliff Kane
From:
the late great golden state
|
|
|
|
