| Author |
Topic: Mike Sigler featured on Bev Coldiron's CD (my wife) |
Alan Coldiron
From:
Pittsburgh, Pennsylvania, USA
|
Posted 8 Jun 2010 3:17 pm |
|
Over the past few months I have been working on a country CD for my wife, something we have wanted to do for years. It features many forum member such as Mike Sigler, Jim Thompson, and Chuck Campbell on steel, Rick Campbell on fiddle, Jim Hartley on Drums, and me on bass. This is just one song off the project with Mike Sigler:
https://home.comcast.net/~adcoldiron1/Bev_Project/HomeYoureTearinDown.mp3 |
|
|
 |
Larry Lorows
From:
Zephyrhills,Florida, USA
|
Posted 8 Jun 2010 6:58 pm
|
|
That's good country music, Alan. Your dad would be proud of you and your wife. Keep up the good work. Larry
_________________
U12 Williams keyless 400
Vegas 400, Nashville 112, Line 6 pod xt |
|
|
|
Jack Harper
From:
Mississippi, USA
|
Posted 8 Jun 2010 7:23 pm
|
|
o.k., ....someone's gonna ask these questions, so, it might as well be me.
is this an original song? who is/are the writer-s?
i know ....all songs are original!
it seems familiar and then it don't.
was this a studio project or a file sharing internet project? how many tunes will fill the album?
the voice is as fresh as the production...very good!
hoosier daddy?
country.......... |
|
|
|
Charles Davidson
From:
Phenix City Alabama, USA
|
Posted 8 Jun 2010 8:08 pm
|
|
LOVE IT,LOVE IT,LOVE IT. Country to the bone.      YOU BETCHA, DYK?BC.
_________________
Hard headed, opinionated old geezer. BAMA CHARLIE. GOD BLESS AMERICA. ANIMAL RIGHTS ACTIVIST. SUPPORT LIVE MUSIC ! |
|
|
|
Danny Hullihen
From:
Harrison, Michigan
|
Posted 9 Jun 2010 1:52 am
|
|
Excellent musicianship Alan! I absolutely love the steel Mike Sigler did on this cut!! Beautiful!
_________________
http://www.jagwirestrings.com |
|
|
|
Alan Coldiron
From:
Pittsburgh, Pennsylvania, USA
|
Posted 9 Jun 2010 4:58 am
|
|
Larry – What I would give for dad to hear this project. My love of steel guitar defiantly came from him and is why steel guitar is featured very prominently on the project. Charles and Danny, thanks so much for your comments.
To answer Jack I’ll start with a little history. I have always wanted to do a country CD for my wife and here it is. The purpose was to leave something for the grandkids and our own enjoyment. No stars here, we are long past 30 so fame is not going to happen plus this is too “Country” for today.
Everyone on this project I call friend and all were very willing to give of their time and talent. The song, ‘Home You’re Tearin’ Down’ is an old Loretta Lynn song. It’s a 12 song CD of remakes of artists like Dottie West, Jean Sheppard, Norma Jean, and Lynn Anderson, nothing original. We even did Ray Price’s ‘Invitation to the Blues’ since you can’t do a real country project without a Ray Price tune! We tried to stay away from female standards like ‘Crazy’ and ‘Once a Day’ which are great songs, but a little over done.
Most of the recording was done in my home studio. Chuck and Rick Campbell and the piano parts on 6 cuts (Craig Morris) were done in their home studios, emailed to me, and merged into the project. Mike Sigler plays on 7 of the cuts. The project was done using Cakewalk’s Sonar program with an M-Audio Project Mix interface.
Bottom line, a few good friends getting together and recording the music we love. Hope that answers most of your questions. |
|
|
|
Red Kilby
From:
Pueblo, CO, USA * R.I.P.
|
Posted 9 Jun 2010 6:59 am
|
|
| VERY NICE |
|
|
|
Mike Sigler
From:
Give Em A Try !
|
Posted 9 Jun 2010 1:22 pm
|
|
Alan, You and Bev done an amazing job on this project.
It was my sincere pleasure to be a part of it...
I think you know my favorite cut on the album.... Now place a link so we can hear it... And man does it move on. To say the least...It was nice to see someone make an album with multiple steel guitar players. If you don't have this album in your Steel Guitar Colection, then Get it soon, ( A must For All Steel guitar Buffs. |
|
|
|
Greg Wisecup
From:
Troy, Ohio
|
Posted 9 Jun 2010 1:31 pm
|
|
Mike is on another multiple steel guitarist project aren't you Mike?
_________________
Derby SD-10 4&5 Black!(duh)/
Derby D-10/Steelers Choice/
Goodrich 120/ 2- Katana Boss 100's
/Nashville 400
RV-3/ Zoom MS-50G
As long as I'm down in the mix I'm Fantastic! |
|
|
|
Mike Sigler
From:
Give Em A Try !
|
Posted 9 Jun 2010 1:33 pm
|
|
Yes I Am, But i won't spoil the surprize, it is also gonna be a killer album.. Can't wait for it as well..
 |
|
|
|
Marty Holmes
From:
Magnolia ,TX USA
|
Posted 9 Jun 2010 1:43 pm
|
|
| Mike what is the 14 note chop on the intro, and turnaround on the tail end, any tab for it? thanx Marty |
|
|
|
Alan Coldiron
From:
Pittsburgh, Pennsylvania, USA
|
|
|
|
Frank Harris
From:
San Diego, California, USA
|
Posted 9 Jun 2010 6:02 pm mike s
|
|
| Outstanding is the only word |
|
|
|
Mike Sigler
From:
Give Em A Try !
|
Posted 10 Jun 2010 3:56 am
|
|
Frank
this entire project was in the hands of Alan, He is a great engineer and so easy to work with, he made my job so easy.. and if you like these cut's wait till you hear the other players on the project. this is for sure one for the steel guitar lovers! the steel in these tunes are right there and out front, Maybe some of the other players will chime in here..
Mike |
|
|
|
Rick Campbell
From:
Sneedville, TN, USA
|
Posted 10 Jun 2010 10:36 am
|
|
| I was honored to be a part of this project among so many good players. |
|
|
|
Norbert Dengler
From:
germany
|
Posted 10 Jun 2010 2:43 pm
|
|
| thats country music the way i like it alan. compliments!!! |
|
|
|
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 10 Jun 2010 5:41 pm
|
|
| Great steel work Mike . The tone was great . Which steel did you use ? G.P. |
|
|
|
Mike Sigler
From:
Give Em A Try !
|
Posted 10 Jun 2010 6:49 pm
|
|
Hi Gary,
GFI Expo, d-10 into a stereo steel rack direct to the board... nothing more nothing less !
thanks for the kind words, im glad you liked it..
Mike |
|
|
|
Danny Hullihen
From:
Harrison, Michigan
|
Posted 11 Jun 2010 2:50 am
|
|
As with everything you play Mike... absolutely stellar!!! We're really looking forward to having you here with us again on our show on August 8th. Personally speaking, I would never want to host a steel show here (or anywhere else for that matter!)without you being a big part of it!
This is really great stuff Alan!, and I'm looking forward to getting a copy of it when it's ready for release. (hint: see if you can get Mike to bring a bunch of your CD's to the show. He'll probably sell out of them like he does with all of his recordings!)
_________________
http://www.jagwirestrings.com |
|
|
|
Alan Coldiron
From:
Pittsburgh, Pennsylvania, USA
|
Posted 11 Jun 2010 9:22 am
|
|
Gary got to tell you when Mike plugged into my console I melted. His rig works very well for him.
Danny the project is at the duplicator now and should have them late next week. Mike is planning to take them to the all the shows and I will make sure there is one reserved for you.
Rick it was an honor to have you on this. The very cool part about your contribution is we never saw each other. I sent you a basic mix, you created the fiddle tracks and emailed them to me. |
|
|
|
Ransom Beers
|
Posted 11 Jun 2010 11:05 am
|
|
| If that ain't country I'll kiss yer a..!!!!!! |
|
|
|
Marty Holmes
From:
Magnolia ,TX USA
|
Posted 12 Jun 2010 11:14 am
|
|
I guess my question will not get awnsered  |
|
|
|
Mike Sigler
From:
Give Em A Try !
|
Posted 13 Jun 2010 3:52 am
|
|
marty i will see if i can do a quick tab on it for you here.. time is the hard thing with tab, it takes so long..  |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 13 Jun 2010 9:33 am
|
|
Mike,Great everything! 
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 13 Jun 2010 2:53 pm
|
|
Mike I love it, all I can say is WOW! REAL COUNTRY.
You did super playing at the Mt. Vernon show too.
Carl "Lucky" Kilmer
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
