| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Anyone tune their Dobro to C6th?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Anyone tune their Dobro to C6th?
John McConnell


From:
Yuba City, CA, USA (deceased)
Post  Posted 9 Jun 2010 6:16 am    
Reply with quote

I have just purchased a Dobro for an acoustic outing and I was wondering if I should tune it to C6th which I have a little experience with or should I go with the traditional Dobro tuning?

John McConnell
Yuba City, CA
View user's profile Send private message
Brad Bechtel


From:
San Francisco, CA
Post  Posted 9 Jun 2010 7:03 am    
Reply with quote

WIll you be playing Hawaiian or mostly country? For most country/bluegrass music, open G will give you the sound others use.

I found that C6th tuning on my Dobro® is too weak, but that's only my opinon. Barney Isaacs made a very nice sounding CD with George Kuo called "Hawaiian Touch" using a Dobro® with C6th tuning.

Dobro® is a registered trademark of Gibson Musical Instruments.
_________________
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 9 Jun 2010 7:18 am    
Reply with quote

I wouldn't tune a dobro to C6th unless it was an 8 string dobro.

BTW: I tune my dobro to an A tuning. This is the original Hawaiian tuning and the one I learned on.
View user's profile Send private message Send e-mail
Will Jaffe

 

From:
California, USA
Post  Posted 9 Jun 2010 9:00 am    
Reply with quote

I have not tried C6 on a reso, but like Brad said the smaller gauge strings on a dobro will sound thin. No harm trying though.
Most 6 string reso players use open G for a good reason, it sounds great and is very versatile.

With open G you can play blues, rock, swing, jazz, bluegrass, country, etc.

All the notes are there. Very Happy
View user's profile Send private message Send e-mail Visit poster's website
Ray Shakeshaft

 

From:
Kidderminster, Worcs, UK.
Post  Posted 9 Jun 2010 9:06 am    
Reply with quote

I have C6/A7 on a Goldtone PBS so that I can just pick it up and practice without electrics. It sounds fine and far from thin.

I play that tuning on lap steels so why change?
View user's profile Send private message
Gerald Ross


From:
Ann Arbor, Michigan, USA
Post  Posted 9 Jun 2010 9:10 am    
Reply with quote

I use these gauged strings on my Gold Tone/Beard Squareneck Reso in C6 and it sounds great. Strings are nice and tight. They aren't as tight as a lot of Bluegrass guys in GBDGBD would like though.

.36 .30 .26 .24 .18(p) .16(p)

CEGACE
_________________
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'

A UkeTone Recording Artist


CEO, CIO, CFO - UkeTone Records
Gerald's Hawaiian Steel Guitar/Ukulele Website
View user's profile Send private message Send e-mail Visit poster's website
Jim Grant

 

From:
New York, USA
Post  Posted 9 Jun 2010 10:05 am    
Reply with quote

how about open g on a lap steel. I am building a double lap and was thinking about trying open g????If so would gages be same as on a regular dobro
View user's profile Send private message Send e-mail
Jerry Gleason


From:
Eugene, Oregon, USA
Post  Posted 9 Jun 2010 12:08 pm    
Reply with quote

I keep a C6 tuning on my Hound Dog Dobro. It isn't quite as loud as it is with heavier strings and the standard tuning, but I think it sounds fine. I'm not a Dobro player, so I tend to treat it as a lap steel, anyway.

Here's a video of me playing "Under the Double Eagle" on it. I post this with apologies to John Ely, whose excellent arrangement for 8 string electric steel I mostly copped for this:

Under the Double Eagle (quicktime movie ~20MB or so)
View user's profile Send private message Send e-mail
Roy Thomson


From:
Wolfville, Nova Scotia,Canada
Post  Posted 9 Jun 2010 12:36 pm    
Reply with quote

Wonderful Playing Jerry!!!

I really liked that. The guitar,
the hands, the tuning all came together
in fine fashion.

Roy
_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel
View user's profile Send private message Send e-mail
Brad Bechtel


From:
San Francisco, CA
Post  Posted 9 Jun 2010 12:58 pm    
Reply with quote

I've just started using open G tuning on lap steel again after mostly playing C6th and/or open D tunings. The Martin Bluegrass resophonic guitar strings (nickel wound, .016 to .059) work just great, as do the Asher lap steel strings. Any set of reasonably heavy nickel wound strings should do fine.
_________________
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars
View user's profile Send private message Send e-mail Visit poster's website
Bill McCloskey

 

Post  Posted 9 Jun 2010 1:10 pm    
Reply with quote

It is hard to argue with great playing like that Jerry, and you've showed it can be done.

Not to get off topic, but what were you using to record this? particularly the video. I'm looking to set something like this up.
View user's profile Send private message
Dom Franco


From:
Beaverton, OR, 97007
Post  Posted 9 Jun 2010 2:15 pm    
Reply with quote

I have my resonator tuned to A6th. With pretty heavy gauge strings, it is amazingly loud and full sounding. Every time I sit in at acoustic jam sessions, musicians are surprised by it's versatility and ask what tuning I am using.
Of course these are not strictly bluegrass songs, so for that situation I would use G6th. My strings are just right so that I can tune down 2 frets to G and still work fine.

Dom
_________________
https://www.youtube.com/channel/UCYG9cvwCPKuXpGofziPNieA/feed?activity_view=3
View user's profile Send private message Send e-mail Visit poster's website
Jerry Gleason


From:
Eugene, Oregon, USA
Post  Posted 9 Jun 2010 2:46 pm    
Reply with quote

Thanks Roy, and Bill, for the nice comments on my video. Bill, I'll send you a PM regarding the production details so as not to divert this thread from the original topic.

The string gauges that I use ( .014, .018, .022, .026w, .030, .036) work fine for C6th (CEGACE low to high), A6th ( E on top), or B11.

G6th makes sense if you want to stick to the gauges for standard tuning.
View user's profile Send private message Send e-mail
Earnest Bovine


From:
Los Angeles CA USA
Post  Posted 9 Jun 2010 3:25 pm    
Reply with quote

Yes; mine is C6 high and A7 low kinda like Jerry Byrd or Joachin Murphey, but with high D, not B. I often retune as the song requires, for example C down to B.
View user's profile Send private message
John McConnell


From:
Yuba City, CA, USA (deceased)
Post  Posted 9 Jun 2010 4:19 pm    
Reply with quote

Thanks to you all for your input. I certainly have a lot to think about and try. I love this forum.

John McConnell
Yuba City, CA
View user's profile Send private message
Ryan Barwin


From:
Hamilton, Ontario, Canada
Post  Posted 9 Jun 2010 4:46 pm    
Reply with quote

Great playing, Jerry. That was awesome!
_________________
www.pedalsteel.ca
View user's profile Send private message Send e-mail Visit poster's website
Robbie Daniels

 

From:
Casper, Wyoming, USA
Post  Posted 9 Jun 2010 5:43 pm    
Reply with quote

I have a six string dobro with a built in pickup like guitars and I use C6/A7 tuning. Works for me.
_________________
Carter D12, MSA S12, 12 String Custom Made Non-Pedal, Evans FET 500LV, Evans SE200, Peavey Nashville 400, Fender Steel King
View user's profile Send private message Send e-mail
Don Barnhardt

 

From:
North Carolina, USA
Post  Posted 9 Jun 2010 6:58 pm    
Reply with quote

I've been using C6and it sounds good with lighter strings but I'm going to try G6 for a while because I don't like tying up an instrument like that.
View user's profile Send private message Send e-mail
Jerry Hayes


From:
Virginia Beach, Va.
Post  Posted 11 Jun 2010 7:31 am    
Reply with quote

John, I have two Dobros one of which is tuned in the stadard G for bluegrass and one (my most used) is tuned to G6th for a more versatile tuning. With this you can still get the majority of your bluegrass stuff plus swing and jazzy sounding improvisations if you're into that. The tuning is (low to high) B D E G B D. What's also nice about this tuning is that you can retune two strings, the high D to E and the 3rd string G to G# and you've got an E7th tuning which is also very useful. On Chandler six string lap steel I have Keith/Scruggs banjo tuners with presets for this.......JH in Va.
_________________
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!
View user's profile Send private message Send e-mail
John Drury


From:
Gallatin, Tn USA
Post  Posted 11 Jun 2010 6:49 pm    
Reply with quote

I have always used C6 on mine, started using open G on a second Dobro a couple years ago, and have a third one tuned to E.

Cindy Cashdollar sounds great on her Steel that Frank Campbell built for her, it is tuned to open G.
_________________
John Drury
NTSGA #3

"Practice cures most tone issues" ~ John Suhr
View user's profile Send private message Send e-mail
Ryan Barwin


From:
Hamilton, Ontario, Canada
Post  Posted 12 Jun 2010 8:54 am    
Reply with quote

I like D6th on dobro...it works for country, blues, and bluegrass (cause it's got 5 open D strings) but it's got the swing sound cause of the 6th tone in it. I use that tuning on lap steel as well.
low to high: A B D F# A D
_________________
www.pedalsteel.ca
View user's profile Send private message Send e-mail Visit poster's website
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 12 Jun 2010 10:11 am    
Reply with quote

Yes, I do. In fact I converted an 8-string fretless guitar to a resonator guitar especially so that I could use C6. (Actually, the scale is longer, so I use A6, but the relationship between the strings is the same.)

http://bb.steelguitarforum.com/viewtopic.php?t=117146&highlight=conversion+resonator

View user's profile Send private message Send e-mail
Roy Thomson


From:
Wolfville, Nova Scotia,Canada
Post  Posted 12 Jun 2010 11:27 am    
Reply with quote

I use C6th on a Resonator I built. The Brute!
I have 8 strings on it but I have a slot on the
top to put the high G there. This comes in handy
when I do lessons ...some use high G and others
use traditional "E"
Either way the sound does not bother me at all.
I have a 6 string Dobro strung Bluegrass G Major.
Here is a short clip I just did for this thread.

http://www.mediafire.com/?2kqma1wmix1



_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 12 Jun 2010 4:48 pm    
Reply with quote

Roy, I listened to your Walking the Floor Over You. Very nice. Cool Is that played on your Dobro or on the instrument in the photo?
View user's profile Send private message Send e-mail
Roy Thomson


From:
Wolfville, Nova Scotia,Canada
Post  Posted 12 Jun 2010 4:58 pm    
Reply with quote

Hi Alan,

That was played on the instrument in the photo
....the brute. Very Happy
_________________
Custom Tabs Various Tunings
Courses Lap Steel, Pedal Steel
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron