Teflon ends for MSA

Billy Cox · From: Burkburnett, Texas, USA

I need 16 (1.5 to 2 in) teflon tuners for 1974 MSA 1/8 rods. Are there any out there? Bill

ray qualls · From: Baxter Springs, Kansas (deceased)

Hi Bill, I don't have any of those but just wanted to say "Hi" to you and hope you're getting along just fine! Your Kansas Buddy Ray.
_________________
Ray Qualls
Member(KSGA)
Inducted into KSGA
Steel Guitar Hall of Fame 2008

Don Poland · From: Hanover, PA.

Contact Wayne Link

http://www.mts.net/~linkon/

Larry Bressington · From: Nebraska

Tom bradshaw has those.
_________________
A.K.A Chappy.

Ernie Pollock · From: Mt Savage, Md USA

If those tuners are loose, put some permatex 'threadlocker' on the threads, then put the nylon nut back on, & tune it & let it set for awhile, that has always worked for me. Clean the end of the rod good before putting the threadlocker on it. I have an old 70's MSA S-12 that I use every day & have done this to several of those.
By the way, I have a bunch of the little short nylon tuning nuts that are used, if its just a case of needing some nuts.

Ernie Pollock Very Happy

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: