Zirc Bars, 7/8" X 3+3/8 or 3+1/2"

ed packard · From: Show Low AZ

A White Zirc Bar list of 7/8" X 3+1/2" or 3+3/8" is being started here. If you would have an intention of purchasing one of these, please sign on so we can keep you updated on progress. Please state prefered length.

The Minimum material lot size that we can obtain is 100 pcs. Then there will be the rejects, so we would end up with less than 100 for shipping.

We need to see that we are covered for the 100 pc lot.

The delivery time frame would be about 2 months out.

If you want to be on the list, please email me by using the email button on this post.

Thanks...Edp

Steve Schmidt · From: Ramsey, MN, USA

Hi Ed
Put me on the list for a 7/8" bar
steve

ed packard · From: Show Low AZ

Steve;

Please send direct via the email button on the post...saves "harvesting".

Thanks; Edp

Jeff Watson · From: Anza, CA. USA

Oh well, it was kinda crazy hoping the next size might be 1". I'll keep hoping.

b0b · From: Cloverdale, CA, USA

Long and skinny! These should work especially well for U-12 players.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video

ed packard · From: Show Low AZ

At this point, the length is negotiable...what do you folk want?

JW....RE 1"...been there and done that 10 years ago. Not likely to happen for a long time. You might try a WTB as these don't wear out...just might have someone else's name on it. A few were made without names.

Peter den Hartogh · From: Cape Town, South Africa

Hi Ed,

Please put me on your list for a 7/8" bar, standard length

Peter den Hartogh
_________________
1977 Sho~Bud D10 ProIII Custom; Sho~Bud SD10 The Professional ; ETS S10 5x5;
Fender 1000; 1993 Remington U12; 1978 Emmons S10 P/P; GeorgeB Weissenborn;
Fluger Cat-Can; Asher Electro Hawaiian; Gibson BR4; Fender FS52; Guyatone 8str;
Fender Resonator ; Epiphone Coronet 1937; Rickenbacher Ace; Rickenbacher NS;
Dynalap 8string; Harbor Lights 8string; Aiersi Tri-Cone; Fender Stringmaster

ed packard · From: Show Low AZ

PDH;

Please send email via the email button on the post...saves me having to harvest replies.

Thanks;
Edp

Rick Schacter · From: Portland, Or.

Hi Ed,
Did you receive an e-mail from me concerning one of your 7/8" zirc bars?
Just want to make sure it got through.

Thanks,

Rick

ed packard · From: Show Low AZ

RS;

I don't find it, try again please.

Everyone:

There is a problem with email names and addresses:

Some folk have several email addresses, so recognizing them from these is a bit of a guess.

Some folk have a "stage name" that they use...another guessing game.

Sometimes the email is presented as from an email address, some times as the stage name, and sometimes as the Real name, or combinations thereof.

Trying to figure out who one is dealing with is a task. Makes list and activity keeping difficult.

To help a bit, doctor up you preferences so that your email asks for a return receipt if you want one.

Maybe it is just me.

Rick Schacter · From: Portland, Or.

Hi Ed,
I just sent you another e-mail.
It looks like my first e-mail bounced back to me, that's why I asked.

My e-mail address is:

berryhillsongs at comcast dot net

Thanks,

Rick

ed packard · From: Show Low AZ

The Forumites have spoken...the bar length will be 3+3/8".

20 more expressions of intent to purchase and we will start the batch of 100 pcs.

Thanks for making my mind up.

Edp

b0b · From: Cloverdale, CA, USA

Put me on the list for one, Ed.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video

Marco Schouten · From: Amsterdam, The Netherlands

Will you be able to accept PayPal soon?
In that case I will order one.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo

ed packard · From: Show Low AZ

Marco...paypal will work, but NO $ till notified.

B0b...you are on. Thanks.

Edp

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: