| Author |
Topic: ZB Forum Donation - Under the Red Paint |
Bob Hamilton
From:
California Central Coast
|
Posted 25 Apr 2010 6:06 pm |
|
Hi folks, I finally got the donation ZB finished up. This is the guitar donated to the Forum last fall by Curt Jarvis. It was painted red, and there was much speculation at the time about what was underneath the paint. As you can see from the photos, It came out pretty nice. I don't currently have a correct CZB decal, but I'll get one on the guitar later, with my next order. It appears that the guitar was belt sanded at one time, and the mahogany zig-zag inlay was partially sanded through on the front apron, so the guitar was just painted red. The damaged inlay was about two inched long, so I was able to remove enough of the old inlay from underneath the endplates to repair the damage. Also, there were many changer parts that needed to be replaced, and I wound up fabricating the lower return levers in the changer, and added new return springs. The guitar plays great, has a very woody sound, and stays in tune very well. I only have three knees on it now, but I'll be adding some more in the near future. It was a great project. Thanks to Curt Jarvis for the donation and b0b for having such a great Forum. Bob
Here are a few before pictures;
Last edited by Bob Hamilton on 27 Apr 2010 6:08 pm; edited 1 time in total |
|
|
 |
Russ Tkac
|
Posted 26 Apr 2010 8:32 am
|
|
Great job Bob!
Russ |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 27 Apr 2010 5:16 am
|
|
Very nice Curt and Bob. Makes you want to strip some paint
see what lies hidden underneath. |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 27 Apr 2010 5:26 pm ZB rehab
|
|
| Thanks Russ and Chuck, I was a happy camper the first time I was able to take this guitar on stage. It has that Scranton sound in spades, and it sure was in need of attention, so it's a good feeling to bring it back. The body was shortened a couple of inches, but the pedal bar wasn't, so I refit the endplates and cut down the pedal bar to put things back in alignment. The E9 changer was pretty messed up, and I made a few cross rods and changer finger lowers, etc. to get it right. I had a few extra parts laying around and that helped out a lot. Hey Chuck, next post I'm going to put up photos of your old ZB 12 string Universal (1060), I finally got it all balanced out, and I can see now why folks say there's no such thing as a ZB uni... |
|
|
|
Alan Harrison
From:
Murfreesboro Tennessee, USA
|
Posted 27 Apr 2010 5:49 pm ZB Knee Lever
|
|
Hi Bob, I have a knee lever like the one shown on you beautifully restored ZB. Nothing but the lever. It came off of a "69" D-10 I bought from Larry Petree in Bakersfield. I removed it because it was not connected to anything, it just hung there. If your interested in it send me an email thru the Forum.
_________________
Mullen (Black) Pre G-2 9x7, B.L. 705 PUP's, Evans SE 200 Telonics NEO 15-4, BJS Bar, Peterson Strobo Flip, Steelers Choice Seat, Folgers Coffee and Hilton Pedals.
"I Steel Without Remorse" |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 28 Apr 2010 5:14 am
|
|
I would love to see it Bob. The most beautiful wood is in
that axe. |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 28 Apr 2010 5:17 am
|
|
Hey Russ. Do you mind if I leave your guitar on my avatar
at least for a little while? |
|
|
|
Russ Tkac
|
Posted 28 Apr 2010 6:14 am
|
|
That's fine Chuck. It was your steel when that picture was taken.  |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 28 Apr 2010 10:24 am
|
|
what was the 'donation' deal with this steel?
who got the money from it and who owns it now? |
|
|
|
Russ Tkac
|
Posted 28 Apr 2010 11:27 am
|
|
| Bob gave the donation to the SGF and received the steel in red and with a little magic, time and talent turned it into the nice steel you see. |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 28 Apr 2010 6:02 pm ZBs
|
|
| Hey Chuck, The ZB here in the photos #1062 is only two numbers away from your 12 string #1060. Chances are they were on the work bench in Zane's shop at the same time. Nice wood in those days. I'll get pix ot the two of them side by side. BH |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 30 Apr 2010 2:05 pm Close serial numbers
|
|
Here you go Chuck, your 12 string ZB and a younger brother. The red one is #1060 and the natural one is #1062. Apparently the 12 string was built for a ZB employee when he worked in Scranton with Zane. I have his name around here somewhere.
 It's now a 6 pedal 3 knee uni (pedals a,b,c,5,6, and 7).
 |
|
|
|
Al Risbeck
From:
Iowa, USA
|
Posted 2 May 2010 5:50 pm outstanding
|
|
Bob it looks like new in the pics. Great Job.
Al |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 3 May 2010 1:29 am Project
|
|
| Thanks Al, I have had a few ZBs, and have been refurbishing ZB guitars for quite a while. This one really has the tone and sustain ZBs are known for in spades. |
|
|
|
Ulf Edlund
From:
Umeå, Sweden
|
Posted 3 May 2010 3:08 am
|
|
What a fantastic job!!!
You turned it into the best looking ZB i've ever seen! 
_________________
1983 Emmons D10 SKH, Carter SD10, Nashville 112, Session 500, ProfexII, Lapsteels, GT-Beard reso, guitars of all kinds...
http://www.myspace.com/ulfedlund |
|
|
|
Will Hesch
From:
Atascadero, California, USA
|
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 3 May 2010 4:57 pm Zb
|
|
| Thanks Ulf and Will, it was a fun project. Will, I got your phone message, and I'll be in touch soon. What did you think of the tone of this ZB at the Pour House Opry? I was playing thru a Nashville 400. |
|
|
|
Will Hesch
From:
Atascadero, California, USA
|
|
|
|
Willis Vanderberg
From:
Petoskey Mi
|
Posted 3 May 2010 5:24 pm
|
|
| WOW ! Those legs are by far the highest over normal height I have ever seen ? |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 3 May 2010 5:40 pm Zb
|
|
| Yes Will, there was basically two of every instrument that night, so I was kicking back a little. 29" from the floor to the E9 strings Willis, is that over normal height wise? |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 5 May 2010 11:12 am
|
|
| The old 12 string looks great. thanks for the pics. You've done a bang up job on both steels. |
|
|
|
