| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Cleaning Up A Stringmaster
Reply to topic
Author Topic:  Cleaning Up A Stringmaster
Earl Grubbs


From:
Murfreesboro, TN, USA
Post  Posted 10 Apr 2010 4:33 am    
Reply with quote

Hey all. Long time dobro player and newbie steel player here. I recently rescued a '54 Fender Stringmaster D8 and was wondering what you recommend for cleaning and shining all the chrome on this axe and if it is ok to use it on the pickups as well.




View user's profile Send private message Send e-mail Visit poster's website
Ken Metcalf


From:
San Antonio Texas USA
Post  Posted 10 Apr 2010 5:31 am    
Reply with quote

It looks pretty bad,
For a small fee I could haul it away for you.
You know they charge extra these days to relic a guitar.
I would start by taking the strings off, and go with a damp rag Q-tips and work your way up to a mild watered down soap,if necessary , maybe some chrome cleaner.
Not too much and not to wet.
I like it the way it is.
New strings and you'll be set.
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes
View user's profile Send private message Send e-mail
Eric Philippsen


From:
Central Florida USA
Post  Posted 10 Apr 2010 4:10 pm    
Reply with quote

Very nice. I would not call that being in bad condition.

Now, you're not so much the owner as you are the caretaker of it. So, here I go being blunt: Please don't refinish it.
View user's profile Send private message Send e-mail
Earl Grubbs


From:
Murfreesboro, TN, USA
Post  Posted 10 Apr 2010 5:18 pm    
Reply with quote

Ken, thanks for the info!

Eric, I think it's in pretty good condition also, all things considered!
View user's profile Send private message Send e-mail Visit poster's website
David Beckner


From:
Kentucky, USA
Post  Posted 10 Apr 2010 5:40 pm    
Reply with quote

Earl a visit to Guittar center or store that sells Virtuoso polish and a little elbow grease and this will look splendid.
_________________
WILCOX SD10 (love the white mica)
WALKER SEAT
NASHVILLE 400
BEHRINGER RACK TUNER
CUSH CASE RACK
PEAVEY DELTA FEX
PARTS CASTER.Gospel and Classic Country Music
http://www.dbupholstery.yolasite.com
View user's profile Send private message Send e-mail Visit poster's website
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 10 Apr 2010 6:19 pm    
Reply with quote

I've seen Stringmasters in a lot worse condition than yours. Solvol Autosol is a chrome cleaner made for automobiles, but it's the best chrome cleaner I've used on guitars. Since your guitar is natural wood color you might try Old English furniture polish. It's good for covering scuff marks.
View user's profile Send private message Send e-mail
Ulric Utsi-Ã…hlin

 

From:
Sweden
Post  Posted 11 Apr 2010 12:11 am    
Reply with quote

As Ken implies,and as can be established by looking
into the Vintage & Faux Vintage Electric Spanish
Guitar world;people pay lots of money for a heavy
relic surface like the one on Your guitar.McUtsi
View user's profile Send private message Send e-mail
Jon A. Ross

 

From:
not actually FROM Maine...
Post  Posted 11 Apr 2010 7:16 pm    
Reply with quote

Wow, lookit all the wear around the p.u.s! It looks like someone played the daylights outta this gtr; cool! I would much rather see that than a 50-60 yr old gtr in "unplayed" condition!
View user's profile Send private message Send e-mail Visit poster's website
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 13 Apr 2010 3:03 pm     Stringmaster clean-up
Reply with quote

Careful what you use to clean up the wood finish. Some stuff will eat it. Treat the wood finish like a nice old D-28 Martin and I think you will be OK. Maybe a moist cloth and that's about it. For the metal clean up, see what other's have recommended. Now, there's one thing that I do with all Stringmasters. I carefully remove the nut and take the tuner pans out and clean them up and give them a good oiling. Sometimes the crown gear is too tight (see Paul Hosteler's web page about that)

http://www.lutherie.net/tuner.maintenance.html

Those old lollipop tuners are fragile, so be careful. It's a great, long scale guitar. and yes, please don't refinish it. : )
_________________
To write with a broken pencil is pointless.


Last edited by Tom Wolverton on 13 Apr 2010 3:08 pm; edited 3 times in total
View user's profile Send private message Send e-mail
Ben Feher


From:
Austin TX
Post  Posted 13 Apr 2010 3:04 pm    
Reply with quote

If it doesn't come off with a slightly damp soft cotton rag its meant to be on the guitar. Its earned that grime from years of dedicated service.

Now if it was impeding its playability or tone, that's a different story, but it's not very likely.

I say take a damp rag to it and what doesn't come off leave it, but that's my opinions.

At the end of the day though its your guitar, do what you know is right.
View user's profile Send private message Send e-mail
Earl Grubbs


From:
Murfreesboro, TN, USA
Post  Posted 14 Apr 2010 6:47 am    
Reply with quote

Thanks to all for the advice and no, I'm definately not going to refinish it. I just wanted to clean off some of the grime and dust that has accumulated over the past 50+ years.

Tom, thanks for the tuner advice. I actually road bike so I have plenty of tri-flow at the house. I hadn't even thought of using that as a lubricant for the guitar.
View user's profile Send private message Send e-mail Visit poster's website
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 14 Apr 2010 2:26 pm    
Reply with quote

...and based on an interesting thread over in the non-pedal forum, you might check to see if your neck bolts need to be tighted up.

http://bb.steelguitarforum.com/viewtopic.php?t=181969
_________________
To write with a broken pencil is pointless.
View user's profile Send private message Send e-mail
Rick Winfield


From:
Pickin' beneath the Palmettos
Post  Posted 15 Apr 2010 12:50 am     character
Reply with quote

Looks to me like it's got a lot of "character".
Many happy hours spent entertaining the "folks" and themselves.
If it were mine, I'd just use liquid gold on the wood, and polish the chrome a little
good times, with a nice axe
Rick
View user's profile Send private message Send e-mail
Earl Grubbs


From:
Murfreesboro, TN, USA
Post  Posted 15 Apr 2010 5:38 am    
Reply with quote

Yes Rick, the guitar came from the vicinity of the Arkansas/Texas border so I imagine it's seen a few state line bars and dancehalls in it's days.

One interesting side note: underneath the tuning pans written in pencil is the date 12/54 and the initials LF (Leo Fender perhaps).
View user's profile Send private message Send e-mail Visit poster's website
Rick Winfield


From:
Pickin' beneath the Palmettos
Post  Posted 15 Apr 2010 12:49 pm     Authentic
Reply with quote

Sounds "authentic" to me.
From what little I know, beneath the tuning pans, was where they recorded it's "birthday", and who assembled it.
I'm excited for you !
Rick
View user's profile Send private message Send e-mail
John Billings


From:
Ohio, USA
Post  Posted 15 Apr 2010 1:33 pm    
Reply with quote

An excellent, pretty non-aggressive cleaner is Meguiar's Professional Swirl Remover 2.0. I've used it on old Shobuds, an it works wonders. It really does clean up grime, and gunk, and haze, and makes the finish shine. Wax it afterwards. And apply it by hand, not with a buffer as suggested.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron