Eric West
From:
Portland, Oregon, USA, R.I.P.
|
Posted 4 Apr 2010 10:30 am |
|
I fixed the board connections that had worked loose under the two resistors that are tied together at the top and tied the wiring harness down better out of the way of the pedal so it won't happen again. The work was.......
It cuts signal unlike the old one too unless the cutoff is adjusted too high. I did fix that somewhat by paring the rear stop knob down. It's still more loss than my original. I can see that the painted plastic piece could merely be changed, but we'll see I guess.
I'm wary too of the LoV plugin, but I'm sure I can work with it.
I know Keith would swap me one out, fix the old one, and wouldn't put up a fuss about me fixing it myself. I just don't have time, with the gigs I've got this next weekend or two, and figured the QC feedback might gain him a sale or two.
Letting ones like this out to people that can't fix them isn't the best play, for sure...
Glad I had a soldering iron and could find my reading glasses...
EJL |
|
