| Author |
Topic: Downsizing equipment |
Ron Mishler
From:
Michigan, USA
|
Posted 2 Mar 2010 9:42 am |
|
Is there a way to eliminate stands and mics to 3 amps? Can anyone suggest how to hook up ( 2 Nashville 400's )to my rack w/alesis quadreverb and 1202 Mackie board and my Line 6 guitar amp and run one line to the house? Or, maybe 2 lines one wet, one dry? The problem I've been running into is small spaces and 16 channel boards for a 6 piece Band all singers, electric drums.... Anyway you get my drift. Is there a way to hook my two Nashville's together to the processor and finally to my mixer on stage then to the house? Looking for an easier way w/chords and mic cables.
Ron MIshler
Lansing Mi.
 |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 2 Mar 2010 10:22 am
|
|
| Peavey makes a DI bos that goes between the 400 and its speaker. You can still hear the amp and the signal is somewhat processed before it goes to the mixer so you still get the speaker sound in the mix. |
|
|
|
Ron Mishler
From:
Michigan, USA
|
Posted 2 Mar 2010 10:30 am
|
|
What would be the proper signal path?
 |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 2 Mar 2010 10:35 am
|
|
| You put Peavey's DI box in line just before the signal goes to the speaker. |
|
|
|
Ron Mishler
From:
Michigan, USA
|
Posted 2 Mar 2010 5:55 pm Di
|
|
Thanks Erv I think I'll go w/Radial DI Pro 2 Stereo it will work with both amps or one!
 |
|
|
|
