| Author |
Topic: Diameter of ShoBud connecting rods |
Bill Myrick
From:
Pea Ridge, Ar. (deceased)
|
Posted 15 Feb 2010 7:58 am |
|
| 75 model LDG I have been told they are 7/64 so I ordered a couple --not mine--my rods are almost twice that diameter. I have an M-5 0.8 die that will screw on one of my threaded ones.Any comments ? Thanks. Bill. |
|
|
 |
Bill Myrick
From:
Pea Ridge, Ar. (deceased)
|
Posted 15 Feb 2010 11:42 am
|
|
| I just chased down a mic--my rods mic .166 is there a standard diameter rod such as that or close to it ? |
|
|
|
chas smith R.I.P.
From:
Encino, CA, USA
|
Posted 15 Feb 2010 11:57 am
|
|
| I would expect to see 0.187, at least that's what mine are, 0.187 = 3/16 = #10. And that would be the correct size for a 10-32 thread. If you have a 0.166, that would be close to the 0.164 for a #8 that would be for a 8-32 thread. |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 15 Feb 2010 4:28 pm Rods
|
|
If you mean the pull rods for the fingers they are .1094 or 7/64. Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 15 Feb 2010 6:51 pm
|
|
Sho~Bud pedal-rods & threads are 10x32.
_________________
<marquee> Go~Daddy~Go, (No), Go, It's your Break Time</marquee> L8R, jb
My T-10 Remington Steelmaster |
|
|
|
Bill Myrick
From:
Pea Ridge, Ar. (deceased)
|
Posted 16 Feb 2010 3:17 am
|
|
I ordered 4 short 7/64 rods and found out they are way too small for this 75 Bud and yes they mic .1094 as Martin said.
Mine mic .166
John --when you are trying to locate them do you ask for a 10 X 32 rod ?
Jerry---rest easy, I'm not messing with the LDG just experimenting with some hook ups on my Pro II. |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 16 Feb 2010 5:25 am
|
|
| The pedal rods should be 5/32" in diameter. The 10-32 thread is machine formed on the rod, which makes it slightly larger that the actual diameter of the rod. If you want to thread some rods, you need to use 3/16" rods. |
|
|
|
