| Author |
Topic: JCH parts wanted |
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 15 Jan 2010 4:44 pm |
|
| I have a JCH D10, early 80's. The holes for the rods in the changers are larger on the raises than on the lowers. The pull rods are all the same diameter. To make up the difference there is a little metal ferrel with a step down between the nylon tuning nut and the changer finger hole. Does anyone have any of these to sell? Does anyone know where I could get some of these? It works ok without them, but I am trying to get this guitar back to the way it is supposed to be. |
|
|
 |
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 19 Jan 2010 3:21 pm
|
|
| Have any of you ever seen these on a JCH? Is mine a "one off"? |
|
|
|
Tony Dingus
From:
Kingsport, Tennessee, USA
|
Posted 19 Jan 2010 5:32 pm
|
|
I use to have a 89 model and it wasn't like yours. Try Buck Reid, he would know.
Tony |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 20 Jan 2010 1:32 am
|
|
Danny, i got a JCH for a buddy here & it's had them ferrules
he did away w: them cause he had probs w: them
he put washers between the fingers & the nylon tuners |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 22 Jan 2010 5:05 pm
|
|
| Were they nylon washers or metal washers. It would take a small outside diameter that I don't know where to find. |
|
|
|
Bob Knight
From:
Bowling Green KY
|
Posted 23 Jan 2010 1:33 am
|
|
Danny,
Lowes has a lot of that stuff.
Bob  |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 23 Jan 2010 1:50 pm
|
|
| Yes Bob, I have purchased alot of that kind of stuff from Lowe's. Next time I go to Abilene I'll go thru them drawers again. I bet I can find some with the right size hole, but it's gonna take a small outside diameter so as not to catch the next finger. |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 24 Jan 2010 3:08 am
|
|
| he used thin metal washers Danny |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 27 Jan 2010 4:47 pm
|
|
| I wish I had those ferrels he took off. I guess it would be cost prohibitive to get the across the pond? I don't know anything about shipping across the ocean. |
|
|
|
