| Author |
Topic: correct string height for a 6 string squareneck reso ? |
Harvey Richman
From:
Georgia, USA
|
Posted 12 Dec 2009 12:49 pm |
|
Hello all. I'm fairly new to the reso. Recently traded up from my first squareneck (your basic Rogue) to something a little nicer (Michael Kelly Bayou Deluxe). I've been wondering about string height. From my reading, the higher the better for more down pressure on the spider. However, I would think that also translates to more stress on the neck. At present the strings are 3/8" from the fretboard at the nut and a good 1/2" at the last fret (closest to the saddles). Is this about right? I'm quite happy with its sound as it is. I'm more wondering about possible neck warpage over time. Thanks in advance.
Harvey Richman |
|
|
 |
Robert Murphy
From:
West Virginia
|
Posted 12 Dec 2009 1:16 pm
|
|
| That's about right. A square neck reso can take that kind of tension. |
|
|
|
Tom Wolverton
From:
Carpinteria, CA
|
Posted 12 Dec 2009 1:20 pm nose bleed string action
|
|
I guess you can go too high and start to choke the tone a bit, but it's way up there. For a squareneck, I wouldn't worry about warping it. Mine is 7/16" at the nut and 1/2" at the 12-fret (distance from center of bass string to fretboard surface).
- t
_________________
To write with a broken pencil is pointless. |
|
|
|
Harvey Richman
From:
Georgia, USA
|
Posted 13 Dec 2009 9:16 am Thanks!
|
|
Robert and Tom, thanks very much for your replies. Sounds like my bridge saddles are set about right.
Harvey Richman |
|
|
|
