| Author |
Topic: Amp Stands Offered For Sale |
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 8 Nov 2009 7:43 pm |
|
The reason for the bottom rail, it has more lean back for the purpose of seeing the controls better. It adds stability. It takes about 3 hours to complete this stand. They should sell for about $70.00. the cost of materials and shipping,cost more than half the price. JUST A LABOUR OF LOVE.
#1 STAND IS $28.00 SHIPPED
Send check or money order to.
ERNEST CAWBY
113 NW FAT CAT CRT.
LAKE CITY,FL.
32055
Will ship when you confirm money is sent.
#2 STAND IS POSTED BELOW, DUAL PURPOSE STANDS FOR AMP OR RACK SYS.
ARE $30.00 PLUSS SHIP.
Send zip code for ship price.
Will ship when confirmed order received.
I am now building the stands again, they are light weight,3lbs, fold tight ,have a locking open device and a safty chain to prevent spreading overload. come in black or color of your choice for extra charge.
NEW PRICE BECAUSE OF THE OF THE WAY THINGS ARE NOW
IS $28..00 shipped to you. This price is with the new finish.
THIS IS #1
THIS IS #2
ernie
Last edited by Ernest Cawby on 5 Nov 2010 6:55 pm; edited 7 times in total |
|
|
 |
Al Vesel
From:
Chisholm, Minnesota, USA
|
Posted 8 Nov 2009 11:20 pm Amp Stands
|
|
I have a couple of these stands that I bought from Ernie over a year ago. They are great amp stands. They hold my Session 500 and Nashville 1000 amps with no problem at all. And amps don't get much heavier than that.
And this is a GREAT PRICE!!!
Al Vesel
_________________
Emmons LeGrande SKH D-10 - WALKER STEREO STEEL AMP w JBL ENCLOSURES & TC ELECTRONICS M-ONE XL PROCESSOR, HILTON VP,FURMAN POWER CONDITIONER, SARNO's Steel Guitar BLACK BOX,BJS,ToneMaster bars,FENDER Strat, FENDER & Ovation acoustic's
Last edited by Al Vesel on 25 Nov 2009 4:26 pm; edited 1 time in total |
|
|
|
Bob Knight
From:
Bowling Green KY
|
Posted 10 Nov 2009 6:50 am Nice Stands!!!!
|
|
Ernie built one of these for me a few years ago, I still use it. They are great!! 
Bob |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 10 Nov 2009 10:25 am hi
|
|
Bob look close and see the improvememts, there is a locking device now to hold it open, and velcro to hold it shut, not like the heavey metal ones that fell on Nan,s foot that caused me to make these to srart with.
ernie |
|
|
|
Nick Reed
From:
Russellville, KY USA
|
Posted 11 Nov 2009 4:39 pm
|
|
they're light but heavy duty!
Last edited by Nick Reed on 27 Nov 2009 12:13 pm; edited 3 times in total |
|
|
|
Larry Moore
From:
Hampton, Ga. USA
|
Posted 11 Nov 2009 8:29 pm
|
|
Are you bring any to Saluda this weekend?
Larry |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 12 Nov 2009 12:08 am hi Larry
|
|
If I can get with Ken before he leaves, send me your address will mail one out tomorrow , already packed to ship.
I just checked my records I have your address just let me know if you want me to mail.
ernie |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 13 Nov 2009 3:53 am hi
|
|
Lary I will have your two in the mail right away.
ernie |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 15 Nov 2009 1:30 pm Stands
|
|
ALL ORDERS SHIPPED.
ERNIE |
|
|
|
Jack Dougherty
From:
Spring Hill, Florida, USA
|
Posted 15 Nov 2009 3:47 pm
|
|
I have the prototype. Still works good.
Ernie is like my tuned guitar...Straight up 
These are light and functional for a good price.
_________________
There is no such thing as too many steels!!
Emmons P/P 8/7 Strings....whatever I have.....Picks..mixed...Bars...one of four..but I like the Bullet Bar
Walker Stereo Steel Amp
TC M1 XL
Peavey Nashville 400. Fox Mod
Various sundries and toys.. |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 17 Nov 2009 8:21 am Hi
|
|
Jack I will bring the parts to the next meeting to upgfrade yours.
ernie |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 20 Nov 2009 10:13 pm bLIMISHED OFFER ALL SOLD
|
|
i HAVE 3 STANDS THAT ARE BLIMISHED SOME RASH ON THE
HAVE BEEN SOLD OUT
ernie
Last edited by Ernest Cawby on 21 Nov 2009 8:11 pm; edited 1 time in total |
|
|
|
Michael Strauss
From:
Delray Beach,Florida
|
Posted 20 Nov 2009 11:15 pm
|
|
I'll take a blem one.
Michael
_________________
Carter S-12U, Sho-Bud LGD (80's), Fender Jazz King, Korg Pandora Toneworks PX4D, Modulus Q6, Ampeg B5R, Lapstick Travel Guitar mod to lapsteel |
|
|
|
Chris Garner
From:
Alabama, USA
|
Posted 21 Nov 2009 10:20 am
|
|
| I'll also take a blem one. E-mail sent. |
|
|
|
T. W. Hatem
From:
Northern Hemisphere
|
Posted 21 Nov 2009 7:38 pm Blems
|
|
| Email sent.... |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 23 Nov 2009 6:25 am hi
|
|
I am now using a harder finish on the updated stands, black background with whte spots. If you would like the old one's they will cost $28.00 shipped to you.
ernie
Last edited by Ernest Cawby on 18 Mar 2010 6:38 am; edited 1 time in total |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 25 Nov 2009 10:57 am Hi
|
|
UP TO THE
ERN |
|
|
|
Nick Reed
From:
Russellville, KY USA
|
Posted 25 Nov 2009 12:43 pm
|
|
I use one of UNCLE ERN's amp stands with a Fender Twin Reverb sittin on it. . . . .hey thats 72 lbs folks. Those little stands can hold a pretty big package!
Nick
Last edited by Nick Reed on 27 Nov 2009 2:07 pm; edited 3 times in total |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 27 Nov 2009 10:03 am Hi
|
|
hELLO nICK.
ERN |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 28 Nov 2009 6:18 pm hi
|
|
Sunday bump
ern |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 29 Nov 2009 8:35 pm hi amp stands must work for you
|
|
They are guarenteed, if they brake at anytime , send $10.00 will ship you a new one no questions asked. no explanation needed, i trust you. I just sent one to a owner, it split after a year he did not want to post it on the forum, we made contact by email.
Lynn Owsly has been using one for about 4 years , just sent him one of the updated ones.
These are jig made, glued with Grade 2 heavy duty glue, pre drilled on a floor drill press to make sure they are straight and counter sunk, I use life time coated screw, #9 star bits, in a jig clamped down so they are straight, sanded all over on a belt sander,smoothe and sized.,Spray coated 3 coats of multi coated paint. Tested up to 200 lbs.
ernie |
|
|
|
Michael Strauss
From:
Delray Beach,Florida
|
Posted 29 Nov 2009 8:42 pm
|
|
I got mine last week. I set it up and put my Jazz King on it and it's sturdy as a rock. Thanks Ernie.
_________________
Carter S-12U, Sho-Bud LGD (80's), Fender Jazz King, Korg Pandora Toneworks PX4D, Modulus Q6, Ampeg B5R, Lapstick Travel Guitar mod to lapsteel |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 30 Nov 2009 6:12 am
|
|
Works great with my "made from scratch" Deluxe clone!
 |
|
|
|
Ernest Cawby
From:
Lake City, Florida, USA, R.I.P.
|
Posted 1 Dec 2009 11:35 pm hi ken
|
|
@ very nice looking guitars, glad you like your stand.
ernie |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 14 Jan 2010 8:13 pm
|
|
I bought one of Ernie stands for my music room, to hold my Fender Princeton. It works great!
<center>
</center>
A marvelous little invention - really strong and lightweight too!
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
