2-String EBow

Bud Harger · From: Belton, Texas by way of Baton Rouge, Louisiana

These are rare, but somebody out there must have one...and wants to sell it.

I'm looking for you! Please contact me by e-mail...I'm traveling right now, but have some access to e-mails...I'll get right back to you.

Thanks,

bUd

Bob Evens · From: Loganville,GA 30052 USA

I would like to find one too.

------------------
Play with your heart... your hands and feet will follow
Zum D-10
DPC-750/Profex ll, DPC-1000/Lexicon-MPX-1/Evans Pre-amp

Darvin Willhoite · From: Roxton, Tx. USA

I think most of us would like to have one. Maybe someone should setup and make them, they shouldn't be too complicated. Brad Sarno???

------------------
Darvin Willhoite
Riva Ridge Recording

Keith Cordell · From: San Diego

I have talked to Heet Sound, the makers of the Ebow, and they have no plans to make one like the old steel guitar one, but they are about to release a bass Ebow that should easily accomodate 2 strings on a steel. And it'll be strong as hell, too.

Doug Beaumier · From: Northampton, MA

There was one on eBay about three years ago with it's original box (showing a cool graphic of a pedal steel player), in great condition, and it sold for over $400. Very few 2-string EBows were made. They're as rare as hen's teeth.

I read somewhere that these units had potted (sealed) electronics, and were not easily repairable.

------------------
My Site - Instruction

Mike Perlowin · From: Los Angeles CA

only 200 were made, and of those, 15 didn't work and were trashed.

Red Rhodes had one, which his widow still has, but she won't sell it.

Bud Harger · From: Belton, Texas by way of Baton Rouge, Louisiana

Thanks for your help. I knew it was a lost cause, but then "sometimes, you just don't know!"

I have a 1-string model that I bought from Keith Cordell, that works great. I'll keep trying to find a 2-string.

Can I get dibs on the first one that comes up on the Forum?

Best regards,

bUd

Mark van Allen · From: Watkinsville, Ga. USA

The thing about the "steel model" ebow, was that the bottom shoe was sized to sit on two strings that were four strings apart, so that the two activated strings were separated by one non-activated string. In other words, you could play harmonies on strings 3 and 5, 4 and 7, etc. Tipping the bow front to back blended the strings to whatever amount you wanted. Very cool.

The Bass ebow might be able to active two adjacent strings, but that harmony interval was the real charm of the original.
I still have mine, but it's long since given up the ghost and I've been told repeatedly it's unrepairable. Sigh.

Keith Cordell · From: San Diego

The reason I actually called Heet was to find out about a repair to Mark's unit. They were epoxy potted and there is no known way to repair them. Enough guys get after Heet though and they may make some again- they don't perceive enough of a demand to make them now.
Consider that Guitar Center sells on the order of 20 of thecurrent ones every day chainwide, meaning they are selling about 7500 a year- not counting all the other companies that sell them. They aren't likely to generate that kind of sales for this market if they made the steel guitar Ebow; but if they can get enough $$ out of each one, they might be convinced to make a couple of thousand to sell for a high markup. I know I would pay a dear sum of money for one.

[This message was edited by Keith Cordell on 15 October 2006 at 07:26 PM.]

Kevin Mincke · From: Farmington, MN (Twin Cities-South Metro) USA

I've got one of the original ones that had the thick leather case w/clip (shaped like the eBow) that attached to your belt. If anyone's interested I'll ask someone to post the pic.

Dave Van Allen · From: Doylestown, PA , US , Earth

Kevin- is yours one of the 2 string models?
I've got an original 1 stringer with holster... did they make a holster for the 2 stringer?

Keith Cordell · From: San Diego

I sent him a mail asking that, and his is the one string version, they never made a holster for the 2 string unit.

Keith Cordell · From: San Diego

I spoke this morning again to the fine folks at Heet sound, the makers of the Ebow. They were relatively unaware of the interest in these units, so I directed them to this thread just to make them aware of the discussions going on. The person I talked to also referenced Mike Perlowin as someone he had discussed this with. If you are interested in these, speak up and let them know that if they make 'em, we will buy 'em!

Pete Burak · From: Portland, OR USA

I'm interested.
FWIW, I made an experimental 2 string version out of two one-string-ers.
I put two one-string ebows on the strings, (you have to put one in front of the other), and cut and glued a piece of stiff cardboard to the top with rubber cement (which can be completely removed... in order to return to GC).
Uhhh... it worked... but a two stringer would obviously be way better.

Mike Maddux · From: Cerritos, CA

I would sure be interested...I love the one string e-bow

------------------
Regular Rig: 60's Versatone Pan-O-Flex Amplifier, '85 Fender Tele Custom, '98 USA Fender Strat, Magnatone G-70, Harmony Steel, Silvertone Steel, Sho-Bud Maverick

Cliff Kane · From: the late great golden state

I love my Ebow, and I would absolutely buy a couple of reissues of the "steel guitar" two-string model. C'mon Heet! Please do it!

James Morehead · From: Prague, Oklahoma, USA - R.I.P.

I'm in.

Mark Krutke · From: Tomahawk, WI USA

Hey Bud,

Get a hold of Albert Svenddal and try to talk him out of his

.

Mike Harmon · From: Overland, Missouri, USA

EBow's email address is:

talkk@ebow.com

And their phone number is:

(213) 687-9946

Get in touch with them and tell them what you want!

Mike

Alan Kirk · From: Scotia, CA, USA

I sent 'em email supporting their making another 2-string model, with a suggestion for a design change. Because string spacing varies from guitar to guitar, and because steel players often play two notes that are separated by one or two strings, I suggested that any new 2-string ebow have an adjustable width feature so you could set it up to excite two non-adjacent strings.

[This message was edited by Alan Kirk on 18 October 2006 at 05:27 AM.]

John McClung · From: Olympia WA, USA

Imagine my discovering I have hen's teeth!

I own the 2-string model, got it in the early 80's from Tom Bradshaw. It works perfectly, and I've never had problems with it luckily.

I might consider trading it for a loaded Zumsteel SD-12...

------------------
E9 lessons
Mullen D-12/Carter SD-10/Webb amp/Profex II+Lexicon MPX-110 OR Line 6 Pod XT

Bud Harger · From: Belton, Texas by way of Baton Rouge, Louisiana

Just to keep this going...I want my name on the list for a new 2-string EBow.

Thanks,

bUd

John McClung · From: Olympia WA, USA

Bud, if you have a 4+6 SD-12 Zumsteel to swap, we can talk...

------------------
E9 lessons
Mullen D-12/Carter SD-10/Webb amp/Profex II+Lexicon MPX-110 OR Line 6 Pod XT

Paul Brainard · From: Portland OR

I've been working on a concept, basically think of it as a 10-string ebow: a row of electromagnetic poles (like a pickup) that could mount underneath the strings on a steel, controlled by a little strip of momentary switches to turn particular strings on and off. So you could play steel like some kind of a feedback organ. (I even though of calling it the "Brainbow". . .) I'll let you all know if I ever actually manage to put something together.

John McClung · From: Olympia WA, USA

Paul, that's a great idea, one I was thinking about, too, resulting from this thread. While the 2 string Ebow is cool, my fave harmony strings are 5+8, and 6+10. Your contraption would give me that.

Would a midi setup with a 10 or 12 string pickup be able to yield unending sustain like we want for any/all strings?

------------------
E9 lessons
Mullen D-12/Carter SD-10/Webb amp/Profex II+Lexicon MPX-110 OR Line 6 Pod XT

Forum Index > Wanted To Buy	Goto page 1, 2 Next	Next oldest topic :: Next newest topic