Author |
Topic: Pickup ohms question |
Pat Comeau
From: New Brunswick, Canada
|
|
|
![](templates/respond/images/spacer.gif) |
Dave Mudgett
From: Central Pennsylvania and Gallatin, Tennessee
|
Posted 25 Aug 2009 7:58 pm
|
|
It depends on the pickup design. But in a typical pickup design, more windings (higher resistance in Ohms) lower the resonant peak and Q-factor of the pickup, leading to response that is generally perceived to be less distinct and bright.
I think this paper by Steve Errede from the Physics Dept. at the University of Illinois makes good reading for anyone trying to understand how pickup design parameters affect performance. |
|
|
![](templates/respond/images/spacer.gif) |
J Fletcher
From: London,Ont,Canada
|
Posted 26 Aug 2009 8:03 am
|
|
Lower ohms is brighter. Higher ohms is darker. I have a tapped coil pickup in my steel. At 18k ohms it is very middy, at 9k ohms it is thinner sounding. You also lose volume with fewer windings. I prefer the lower ohms setting. Not too many people do though...Jerry |
|
|
![](templates/respond/images/spacer.gif) |
J Fletcher
From: London,Ont,Canada
|
Posted 26 Aug 2009 8:03 am
|
|
Lower ohms is brighter. Higher ohms is darker. I have a tapped coil pickup in my steel. At 18k ohms it is very middy, at 9k ohms it is thinner sounding. You also lose volume with fewer windings. I prefer the lower ohms setting. Not too many people do though...Jerry |
|
|
![](templates/respond/images/spacer.gif) |