| Author |
Topic: Tuning nuts |
David Nugent
From:
Gum Spring, Va.
|
Posted 15 Aug 2009 6:59 am |
|
| Could someone please tell me what size nylon tuning nuts are used on an Emmons LeGrande II, 3/32" or 1/8" and also the length....Thanks. |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 15 Aug 2009 7:43 am
|
|
| 7/64 (.109") I believe and I forget the length. |
|
|
|
Roger Guyett
From:
San Francisco, Ca.
|
Posted 15 Aug 2009 9:54 pm
|
|
Hi -
Do you want Rod size or Tuning Nut size? The sizes youve quoted are more commonly rod sizes.
I think the TUNING NUTS are 3/16", arent they...? I believe they are 3/4" long.
The RODS are 7/64 (just under an 1/8"), as Jim Palenscar said.
Here's the Emmons catalogue link:
http://www.emmonsguitar.net/replacementparts5.htm
The tuning nuts are the part labelled R |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 16 Aug 2009 3:48 am Tuning nuts
|
|
| The George L website lists two rod sizes, 1/8" or 3/32" and several length options. I am researching this information for another party so unfortunately I do not have access to an Emmons guitar. Could the 3/32" nuts be adapted, or should the next larger size be used? |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 16 Aug 2009 7:36 am
|
|
| The 3/32" size will work but they need to be drilled out a titch. |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 16 Aug 2009 10:52 am Tuning nuts
|
|
| Jim...Thanks so much for your input, I will pass this information along. |
|
|
|
