| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Standing up with a Vol Pedal
Reply to topic
Author Topic:  Standing up with a Vol Pedal
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 12 Aug 2009 1:59 pm    
Reply with quote

For those of you that stand up and also use a vol. pedal as part of your playing techniquem what VP do you prefer?
_________________
To write with a broken pencil is pointless.
View user's profile Send private message Send e-mail
Clyde Mattocks

 

From:
Kinston, North Carolina, USA
Post  Posted 12 Aug 2009 6:28 pm    
Reply with quote

I sometimes play with Chis Malpass, who does early
(40's, 50's) stuff and when I use a stand up console
steel, I use an old Fender pedal. I have screwed a couple of longer screws into the front to raise it up
about an inch.
_________________
LeGrande II, Nash. 112, Fender Twin Tone Master, Session 400, Harlow Dobro, R.Q.Jones Dobro
View user's profile Send private message Send e-mail
Papa Joe Pollick


From:
Swanton, Ohio
Post  Posted 12 Aug 2009 8:52 pm    
Reply with quote

I use an old Fender vol/tone pedal,but I don't keep my foot on it..when I need a swell or tone change I just touch on it and get off.
View user's profile Send private message Send e-mail
Tim Whitlock


From:
Colorado, USA
Post  Posted 13 Aug 2009 4:57 am    
Reply with quote

I use a Fender vol/tone. I have an original and one of the new re-issues. Playing standing up is old style and the Fender is the perfect match, as well as being sturdy enough to put some weight on. Plus you can get that great doo-wah effect to give your old style music even more authenticity and it's fun, too. The re-issues can be had for less than $100 if you shop around. The tone action can be a little stiff out of the box but if you work with it, it will loosen up.
View user's profile Send private message Send e-mail
Rick Collins

 

From:
Claremont , CA USA
Post  Posted 13 Aug 2009 6:00 am    
Reply with quote

You'll be happier with your playing if you don't rely on the volume pedal.
There is very little you can do with a VP, that you can't do without.
View user's profile Send private message Send e-mail
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 13 Aug 2009 6:06 am    
Reply with quote

Rick - Maybe - depends on what kind of music you are playing. I often do modern, pedal steel stuff, so the VP swells are part of that sound. But, yes, I like playing without it too. I don't typically use the top knobs and I don't do bo-wah stuff with the tone knob.
_________________
To write with a broken pencil is pointless.
View user's profile Send private message Send e-mail
Garry Vanderlinde


From:
CA
Post  Posted 13 Aug 2009 6:52 am    
Reply with quote

The Fender and Bigsby V/T pedals work great for standing. Just don't stand on one leg too long; you could end up a cripple, especially wearing cowboy boots. Exclamation
View user's profile Send private message Send e-mail
John Billings


From:
Ohio, USA
Post  Posted 13 Aug 2009 7:51 am    
Reply with quote

Hook a volume pot to a Thigh Master.
View user's profile Send private message Send e-mail
Jon Nygren


From:
Wisconsin, USA
Post  Posted 13 Aug 2009 7:54 am    
Reply with quote

So Tim, do you like the reissue Fender? I've been thinking about getting one of these. The tone sweep is wide enough for your tastes?
View user's profile Send private message Send e-mail
Tim Whitlock


From:
Colorado, USA
Post  Posted 13 Aug 2009 1:14 pm    
Reply with quote

Hey Jon - I didn't like the re-issue V/T at first, compared to my original, but I now use it as my #1. As mentioned, the tone action was way stiff, but I loosened the swivel screw inside the pedal, lubed it and worked it repeatedly until it had usably quick action. As far as the tonal range - it's very close to the original. You can get all your doo-wahs and wa-wa's. Like most Fender products the pedal can be easily disassembled so you can change the cap values if you want a different tonal response. I didn't like that Fender put the output and input jacks on opposite sides of the pedal, but it's not a deal killer. They kept the price at around $100 so I think it's a great value, in spite of the minor issues.
View user's profile Send private message Send e-mail
Jon Nygren


From:
Wisconsin, USA
Post  Posted 13 Aug 2009 6:24 pm    
Reply with quote

Thanks Tim! Just the info i'm looking for.
View user's profile Send private message Send e-mail
Marty Smith

 

From:
California
Post  Posted 16 Aug 2009 7:47 am    
Reply with quote

I use started with Bigsby pedal,and always have used one. I works perfect.
View user's profile Send private message Send e-mail
Keith Cordell


From:
San Diego
Post  Posted 16 Aug 2009 9:14 pm    
Reply with quote

I use a Goodrich 120. I don't really stand, though, I sit on the edge of a high barstool so it looks like I'm standing and I can still control my effects from the floor, with my guitar on a projector stand. Works pretty well.
View user's profile Send private message Send e-mail
Tom Wolverton


From:
Carpinteria, CA
Post  Posted 17 Aug 2009 7:13 am    
Reply with quote

Keith - your approach is what I've been thinking makes the most sense. It takes the weight off of the one leg. I know of a pedal steel player that does this and it works well for him.
_________________
To write with a broken pencil is pointless.
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 17 Aug 2009 11:40 am    
Reply with quote

The old Fender volume pedal (not the volume/tone pedal--I've got both) has the pivot dead-center as opposed to Goodrich pedals et al that have the pivot closer to the heel. The Fender pedal, full-on, is a toe-down position rather than horizontal/level. I find this more comfortable for stand-up playing and the Goodrich position more comfortable for sit-down. I'm sure I could get used to either one, either way.
I haven't checked the reissues so I don't know if they've kept this geometry.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron