| Author |
Topic: Spraying Isopropyl Alcohol on strings |
A. B. Traynor
From:
4th Street& Royal ave New Westminster, British Columbia, Canada
|
Posted 27 Jul 2009 4:55 pm |
|
Has anyone been doing this, and can they attest to its safety to the laminate finish/ metal/ fretboard over the LONG TERM? I would guesss that the fretboard is glued to the neck, could the alcohol evetually peel it off?
It's just that after a long practice session, the strings get really gunky, I was thinking that spraying alcohol would help keep the strings cleaner, longer.
Thank You,
Adam |
|
|
 |
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Jul 2009 5:11 pm
|
|
I've never heard of anyone using alcohol to clean strings, but I would spray it on a rag and wipe your strings rather than spray it directly on the guitar. Why take the chance?
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 27 Jul 2009 5:17 pm
|
|
| I use alcohol to clean strings often. If you want to spray it instead of wiping it on, just lay a rag or towel under the strings to protect the fretboard underneath. |
|
|
|
A. B. Traynor
From:
4th Street& Royal ave New Westminster, British Columbia, Canada
|
Posted 27 Jul 2009 5:30 pm
|
|
| Thanks fror the responses. Doy you fing that by spraying after practice, that you actually do get mor life from the strings, or do the strings deaded out on their own because of the constant changing of tension? |
|
|
|
Ray Montee
From:
Portland, Oregon (deceased)
|
Posted 27 Jul 2009 7:02 pm AS a commercial pilot..........................
|
|
We regularly sprayed that alcohol stuff on the wings and props of our airplanes to prevent ice from sticking to them and adversely affecting our aerodynamic flight characteristics.
If one's strings get gunky, the hands should be washed thoroughly before playing. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 27 Jul 2009 9:21 pm
|
|
Strings go dead from metal fatigue. If they are getting dirty - yes, they'll sound bad, but they shouldn't get dirty to begin with. I rarely wipe my strings down as I wash my hands - but the sweat in my hands will corrode metal whether I wipe them or not. It attacks stainless more than nickel - so I use nickel strings - but I've found all the packaged "string rejuvenators", alcohol, etc. to be snake oil....
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Jul 2009 11:18 pm
|
|
My hands used to sweat real bad. Nothing would prevent the strings from going bad. The best thing to do is wipe your strings and hands often (i wipe my hands and bar on my jeans after just about every song to dry them off. I don't have as much sweating as I did when I was younger.
The best rule of thumb is, If the strings are getting real bad, change them. If you play regularly, like I do, change them often.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Dennis Wallis
From:
Arkansas
|
Posted 28 Jul 2009 12:54 am
|
|
I wipe the strings often when playing with a soft lint free DRY cloth . Isopropyl alcohol contains a lot of water . I would assume that it would not be too good for the strings . If you want to make the strings slick spray some finger ease on a rag and wipe them , That will work temporarily . The spray on auto polish is also good and won't harm the finish or the trim . Never spray anything directly onto the guitar . Always apply to a rag and then wipe it down .  |
|
|
|
Jim Bates
From:
Alvin, Texas, USA
|
Posted 28 Jul 2009 7:09 pm
|
|
A trick I used when growing up in western Oklaoma and having to play inthe hot dancehalls in the summer, was to buy a chuck of alum at the local drugstore and wash my hands before we started the gig, and during the break. Also, I would use the 'old' Blitz cloth during the dance as needed to keep strings clean.
Now, in the hot, very humid Houston area, I can get by with washing my hands before the gig with either Lava soap or Boraxo powdered soap nsither of which have any (or very little) lotion. The lotion really gunks up my strings. Also, keep a towel handy to dry hands as needed.
I also still use the Blitz cloth, but the new ones have very little 'stuff' in them compared to the old versions in the 50's.
Thanx,
Jim |
|
|
|
bill dearmore
From:
Belton,Tx.,USA
|
Posted 28 Jul 2009 8:43 pm
|
|
| Ditto what Jim said.." Blitz Cloth". The very best way! |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 28 Jul 2009 10:56 pm
|
|
| Blitz cloth WILL remove surface corrosion. It does work. |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 29 Jul 2009 3:50 am
|
|
I keep one of the yellow polish cloths that are available at most auto supply/parts stores to dry my hands, and wipe the strings. Also when finished,I wrap the cloth over and around the strings and cover my guitar with my "Sharp"cover. I also have a paint stirrer(the stick they used to give you when you bought a gallon of paint)with a couple of wraps of soft cloth to clean the underside of the strings, and fretboard.
BF
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 29 Jul 2009 5:13 am
|
|
My take is if you need to clean the underside of strings - especially on steel - it's PAST time to change them!
| Quote: |
| Isopropyl alcohol contains a lot of water |
I completely neglected to mention that. Another reason it should not be near a guitar.
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Larry Bressington
From:
Nebraska
|
Posted 29 Jul 2009 5:29 am
|
|
I have used 'Pledge' for 25 years on all instruments.
The string life will really benefit if you clean them every time you get done.
I run 'Elixer' on guitar, they are a great string.
_________________
A.K.A Chappy. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 29 Jul 2009 1:13 pm
|
|
| Quote: |
| I have used 'Pledge' for 25 years on all instruments. |
Dissenting opinion.
Pledge (and similar products) cause build-up and leave a film on the instrument. You do NOT want it on a 6-string or bass fretboard under any circumstances, and you have to keep it well clear of all electronics.
Not a guitar tech's choice.
No argument on Elixers and other coated strings, although some do not like the tone or feel. It's a personal thing. I like the tone of the originals but they last no longer than bronze nickle strings for me on acoustic (I've used nickle instead of the usual phosphor bronze for 15 years or so - a few years ago D'Aquisto came out with their new Tony Rice Set - in nickel!). Nickel strings last as long and are FAR cheaper!
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Larry Bressington
From:
Nebraska
|
Posted 29 Jul 2009 2:50 pm
|
|
Sorry jim, it's never hurt any of my stuff.
I played one guitar on the road for 15 years and never replaced a switch or a pot.
I respectfully disagree that pledge caused harm.
I have never used anything else other than, a few trials on fender polish etc.
I swear by it, plus it helps keep the neck nice and slick, maple or rosewood.
You may be 'technically' correct though, i'm sure a carbon pot does not want it on it's track.
I clean my strings every set at 'break' and wipe clean.
It's just a hunk o wood not a PCB . 
_________________
A.K.A Chappy. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 29 Jul 2009 5:51 pm
|
|
I also used to use Pledge in my early years. I read about it in a magazine or something. But, it was mentioned that you spray it on a rag and wipe only the PLAIN strings by looping the rag around the string. Using any type of wax substance on the wound strings causes the substance to get in between the windings and cause the strings to go dead faster.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Stuart Legg
|
Posted 29 Jul 2009 7:50 pm
|
|
| BO uses vodka. Seriously it doesn't leave a sticky residue like alcohol. He gets a shot and a napkin and cleans the strings. Of course you shouldn't waste things nowadays so he drinks what's left in the shot glass. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 29 Jul 2009 8:53 pm
|
|
| Quote: |
| Using any type of wax substance on the wound strings causes the substance to get in between the windings and cause the strings to go dead faster |
.
Yep. And it'll destroy pots as well.
There are hundreds of stories of players who have used "wrong" products for decades and been lucky.
But "lucky" isn't "right".
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Allen Kentfield
From:
Texas, USA
|
Posted 30 Jul 2009 9:18 am cleaning strings
|
|
I've used rubbing alcohol for years on my strings. It's a lot less expensive than Finger-Eze or similar preparations. I just put it on a rag and wipe the whole string until it stops squeaking. The high pitched squeak will get make the sound man jump, but oh well. I haven't broken strings in years.
Al Kentfield
Sho-Bud with Fender |
|
|
|
Larry Bressington
From:
Nebraska
|
Posted 30 Jul 2009 10:52 am
|
|
| Jim Sliff wrote: |
| Quote: |
| Using any type of wax substance on the wound strings causes the substance to get in between the windings and cause the strings to go dead faster |
.
Yep. And it'll destroy pots as well.
There are hundreds of stories of players who have used "wrong" products for decades and been lucky.
But "lucky" isn't "right". |
Mullen guitar cleaning recommendations are to
' Use pledge furniture polish' it's also on their website 
_________________
A.K.A Chappy. |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 30 Jul 2009 10:56 am
|
|
I think spraying anything on your Instrument is a "bad" idea
but
You can buy these and wipe the strings, I have been doing this for a few years now. They do remove some grit and dirt .
 |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 30 Jul 2009 4:43 pm
|
|
| Spraying isopropyl alcohol on strings ? I guess it beats spilling Jack Daniels on the strings. |
|
|
|
Tony Davis
From:
Brisbane, QLD, Australia
|
Posted 2 Aug 2009 4:01 am
|
|
Couple of years ago I made the mistake of stripping my 1974 Emmons...blowing all the crap out with air...but used a houshold product called Nifty !!!....it faded the colours on the symbols on the fretboard....and left a few white blobs where it should be black !
Next time in Nashville I will have to get my friend Bobbe Seymour to get me a new fretboard
Tony |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 2 Aug 2009 8:34 am
|
|
Larry wrote:
| Quote: |
Mullen guitar cleaning recommendations are to
' Use pledge furniture polish' it's also on their website |
From Mullen Website:
| Quote: |
Cleaning your guitar
Keeping your guitar clean is a simple matter. Wiping it down with pledge furniture polish is a good solution. If you have something that you cannot remove with polish you can use lacquer thinner on Mica finishes but be careful not to over use it. DO NOT use lacquer thinner on a lacquered or painted finishes. Aluminum parts can be polished with Mothers aluminum polish available at most automotive parts stores.
|
They are talking about the GUITAR, NOT the strings. Alcohol (or just about any solvent) will work fine to clean the strings, but keep it off your guitar. Alcohol is a pretty weak solvent compared to others and may not affect mica, but I don't want it anywhere near my lacquer guitar. I'm just not willing to take the chance.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
