| Author |
Topic: legs for D8 guyatone table steel |
Tom Breitenfeldt
From:
Germany
|
Posted 25 Jun 2009 12:18 am |
|
Hi! I'm looking for legs (3) for a D8 Guyatone table steel guitar. The guitar might have been built in the 60s.
Tom |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 25 Jun 2009 6:15 am
|
|
I don't know if you can use these or not but they are available for $50, plus shipping.
 |
|
|
|
Tom Breitenfeldt
From:
Germany
|
Posted 26 Jun 2009 2:24 am
|
|
Thank you very much for your post, but I think this one needs a different kind of screw thread.
Tom |
|
|
|
Bonita Wilson
From:
California, USA
|
Posted 26 Jun 2009 6:27 am Legs
|
|
| Hi,I just seen 4 legs in the 'piano-organ' section in'parts & assecories' on ebay.Came off a whirlatzer?(sp) and their nice (look new) $50.00 plus $15.00 shipping.Also,if you type in "table legs" in the 'all catagories' section of ebay,they have 390 or so auctions of all kinds of legs,not just table.Some pretty ornate and old fashioned.Wood,metal,etc. What ever you want I'm sure is there. Some are even some adjustable, All pretty reasonable too,like $20.00 on up.Saw 8 just now that are selling as a set.Have a few bidders on them of course.You can always buy different screws at the hardware store to match your holes if their not the right ones.Those as you know you just screw in the ends of the legs.So,there you go,no excuses,hope you find what you need.Good luck. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 26 Jun 2009 6:29 am
|
|
I have made some adapter nuts for legs. As long as you are going to a larger threaded flange, it's not a problem.
I will include a set of adapter nuts for you. |
|
|
|
Tom Breitenfeldt
From:
Germany
|
Posted 27 Jun 2009 7:28 am
|
|
Thank you both,
I'll keep my eyes open.
Tom |
|
|
|
