| Author |
Topic: Gibson Ultratone Fretboard Question |
Aaron Warren
From:
Illinois, USA
|
Posted 23 May 2009 11:57 am |
|
I bought a refinished 1948 Gibson Ultratone, but it does not have the Fretboard.
If someone here has one could you email or send me a PM if you would be able to trace the shape of it out, and where the screws go, fret location? I'm having a hard time track one down so I think I'm going to make one.
I'd be willing to pay someone for their time and postage to send it to me.
Thanks! |
|
|
 |
Don McGregor
From:
Memphis, Tennessee
|
Posted 24 May 2009 2:17 pm
|
|
Aaron,
I'm not sure I've mastered posting web addresses yet, but here are a couple of links to online fret scale calculators to try.
http://www.windworld.com/tools/fretcalc.htm
http://buildyourguitar.com/resources/fretcalc/jscrptclc.htm
If you decide to make your own fretboard, just measure your string length from where the string touches the nut, to where it touches the bridge, and type in the required info into one of the calculators.
I would try first printing out my frets on a piece of paper, and taping it beneath the strings snug up to the nut, then try it out to make sure it sounds like the frets are in the right place before I started carving and sawing on a piece of wood or plexiglass.
I've never seen an Ultratone up close, but they are quite distinctive looking in pictures. I hope your project turns out well. You should have a great instrument when you are done. Good Luck! |
|
|
|
Aaron Warren
From:
Illinois, USA
|
Posted 27 May 2009 2:59 pm
|
|
Actually the fret positions arent that important. I really just need the shape of the plate.
If anyone could make a PDF/JPG I can print it.
Thanks |
|
|
|
Richard Shatz
From:
St. Louis
|
|
|
|
Aaron Warren
From:
Illinois, USA
|
Posted 28 May 2009 7:50 am
|
|
| Thanks Richard! |
|
|
|
