| Author |
Topic: Wanted: goodrich pedal bracket |
Tommy Gibbons
|
Posted 15 Apr 2009 12:31 am |
|
Wanted: goodrich pedal bracket
Thanks, Tommy
_________________
Mullen SD-10 RP, Evans SE-200, Line 6 POD XT, Peterson Flip Tuner, Geo. L Cable, Hilton Pedal, and D2F Covers for all. |
|
|
 |
Fred Justice
From:
Mesa, Arizona
|
|
|
|
Jimmie Martin
From:
Ohio, USA
|
Posted 17 Apr 2009 3:23 pm bracket
|
|
| The holes aren't the same. I have a goodrich pedal bracket with the decal on it. for 20.00 shipped. Jimmie |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 18 Apr 2009 2:43 am bracket
|
|
| I have to disagree with Jimmie, I used a Goodrich bracket on my Hilton pedal (minus the decal) and the hole spacing was the same.. |
|
|
|
Ernie Pollock
From:
Mt Savage, Md USA
|
Posted 18 Apr 2009 4:36 am Yep!!
|
|
Goodrich bracket will work on a hilton, I am sitting here looking at my Hilton Low boy with a Goodrich bracket, works fine. My bracket is an old one, but you know, there nothing ya can't do when you have a round file!!
Ernie 
http://www.hereintown.net/~shobud75/stock.htm |
|
|
|
Jimmie Martin
From:
Ohio, USA
|
Posted 18 Apr 2009 6:15 am bracket
|
|
I did to but on a Hilton it has an extra hole. Plus the Hilton turns the pedal at an angle instead of straight ahead. There is quite a difference. If you didn't take out the back screw it will over time strip the front one or maybe both screws. Been there done that. Jimmie  |
|
|
|
