| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic What Size And Type Fuses For Nashvile 400?
Reply to topic
Author Topic:  What Size And Type Fuses For Nashvile 400?
Steve Alonzo Walker


From:
Spartanburg,S.C. USA (deceased)
Post  Posted 14 Apr 2009 2:30 pm    
Reply with quote

My amp blew the fuse located under the transformer and I need to get the correct replacement fuse. Also, What color speaker wire goes to the + speaker connection? Thanks!
View user's profile Send private message
Ken Fox


From:
Nashville GA USA
Post  Posted 14 Apr 2009 3:55 pm    
Reply with quote

The yellow wire is positive (red terminal) blue wire is negative (black terminal). I would be very careful to check for dc voltage on the speaker output before connecting both speaker wires. DC can burn up the speaker in about 1 second!

If you blew a fuse there is likely a problem with the amp. If you have a meter and can check that but, be very careful not to short the speaker wires, you can blow the output transistors is less than a second with a short on those wires.

The primary fuse is listed as a 6 amp fuse. However the fuse type is not listed on the schematic. I know it is not a 312 (clear glass, fast- blo) or 313 (clear glass, slo-blo) series. I have never had to replace one and have not taken one out to determine the type fuse.


View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron