bad sound peavey vegas

Francis Smyth · From: Fermanagh, UK

I purchased a vegas 400 with lemay mod fitted.Im not happy with the sound.It sounds poxey if thats the right word to use.The steel player with the Bellamey brothers used it when they were here on tour and he did not like the sound of it either.Any suggestions. .Thanks in advance

Ken Fox · From: Nashville GA USA

http://bb.steelguitarforum.com/viewtopic.php?t=126287&highlight=

I can send you the kit info. I do not sell the kit, I only install it. You can purchase the materials from my list (prices are a bit out of date) and have a tech do it there.

richard burton · From: Britain

Settings are paramount on a Vegas to get a good sound.

The paramid /shift can destroy your tone if it's set wrong.

I set mine with the shift set on 800, and the paramid turned completely anticlockwise till it won't go no more Very Happy

Here are my other settings:

Bill Duncan · From: Lenoir, North Carolina, USA

Richard,

I see you're going through the #2 input. I do that sometimes but I don't get the fullness, or power, of the #1 input.

I have a Vegas 400 and after a lot of tinkering, (Peavey update kit, JBL), I have come to appreciate and love it.

Can you say "love" concerning an amplifier?

I have found my Vegas to be very settings sensitive. I mean, a little knob movement makes a big difference in sound!

I think the reverb is terrible, so I use a Boss RV3.
_________________
You can observe a lot just by looking

Bill Duncan · From: Lenoir, North Carolina, USA

As a post script to my earlier post.

I enclosed the back on my Vegas, which I think helped the sound tremendously. It took me a while to get the enclosure right, due to insulation and porting parameters. But, once I worked out the details of the enclosure, I found that to really give me the tone and power I am after.
_________________
You can observe a lot just by looking

John Billings · From: Ohio, USA

I like Peavey stuff. I have a few pieces. But,, the Vegas was the only amp I've ever owned that I was happy to get rid of!

Chris Johnson · From: USA

Isn't the first channel of the Vegas 400 EQ'd the same as a standard Nashville 400?

Shorty Rogers · Posted 4 Apr 2009 7:28 pm

What speaker is in it?

Mike Brown · From: Meridian, Mississippi USA

Francis, Peavey mod kits are still available. Call me(if you are in North America) at 1-877-732-8391, ext.1180 and let's discuss.

Bill Duncan · From: Lenoir, North Carolina, USA

Francis,

I ordered the Peavey tone modification kit, and installed it myself. It isn't that hard to do if you can solder, and desolder. Peavey sends good instructions and pictures with a parts list.

It sounds good, but it took me a while to get the tone dialed in after the change.

Remember, the knobs, (buttons, excuse my Southern), on the Vegas really work, and they are sensitive.
_________________
You can observe a lot just by looking

Francis Smyth · From: Fermanagh, UK

What is the difference in the peavey mod kit and the lemay kit.

Ken Fox · From: Nashville GA USA

I have pulled them both out of amps and did not see a lot of difference in the cap values at all.

LeMay marked his IC chips with red finger nail polish, no telling what he used.

I am yet to see an original factory modded amp that had Burr Brown audio chips. The after market kit from Peavey does have those chips in it.

Having seen about 200 of these and Nashville 400's in the last couple of years I have pulled a lot of Lemay and Peavey kits out. Those were were my observations to date.

The Vegas 400 is the same schematic as a N-400 with a addition of a second channel with guitar tone type controls (passive as opposed to active controls).

Chris Johnson · From: USA

Thanks Ken for answering my question.

I hear quite often from players with the N400 saying the V400 they had sounded bad and visa versa........ Oh Well

Must be the deadly "black steels sound best" syndrome. Laughing

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: