| Author |
Topic: what Freg Range is best for steel guitar |
Joseph Barcus
From:
Volga West Virginia
|
Posted 3 Apr 2009 9:13 pm |
|
wondering whats the best freg range for pedal steel guitar, 1502-4 has 40hz-2khz. my amp is a little bright and would like to have a little more lower tone out of it I have a session 400 with the 1502-04 in it but have to run the bass high, and the highs almost off. and still not enough bass for me. no Im not wanting to run it in the mud range just something a little lower is all. any tips??
_________________
https://www.youtube.com/channel/UCvuH7H8BajODaL_wy3_HSJQ |
|
|
 |
Chris Johnson
From:
USA
|
Posted 3 Apr 2009 10:33 pm
|
|
| Try pumping up the shift knob first then adjust the highs to your taste. I had the same problem once upon a time and turning the shift up really thickened everything up (if thats the sound your looking for). The shift on all of my amps never run under 3:00 |
|
|
|
Pat Comeau
From:
New Brunswick, Canada
|
|
|
|
Joseph Barcus
From:
Volga West Virginia
|
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 5 Apr 2009 9:43 am
|
|
| Joe, if you have an early or un-modded Peavey amp, you won't be able to get much bass. Up until about a decade ago, Peavey cut the bass response on their amps to keep from having speaker failures. The result was a middy "nasal" sound that usually can't be dialed out. You can mod the amp, trade it on a newer model, or go the stomp-box EQ route. A simple speaker change won't help very much. |
|
|
|
Joseph Barcus
From:
Volga West Virginia
|
|
|
|
Freddie Wooton
From:
London, ky
|
Posted 5 Apr 2009 8:55 pm
|
|
| Joe, I think you might need to contact Ken Fox. When He gets through with your amp you'll never want to get rid of it, Fred |
|
|
|
