| Author |
Topic: Bars |
Robert Harrington
From:
Connecticutt, USA
|
Posted 24 Mar 2009 1:26 pm |
|
| Can anybody recommend a place to buy a simple bar. One place wanted $30.00 to ship a $25.00 bar. |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 24 Mar 2009 1:40 pm
|
|
You can get the standard or heavy Ernie Ball bar at Musician's friend for $20. (Shipping will cost you another $6.)
They also carry the new stainless steel Ernie Ball models if you prefer, but the chrome one feels better, to me.
note: They stock the bars under the term "slide" |
|
|
|
Robert Harrington
From:
Connecticutt, USA
|
Posted 24 Mar 2009 1:53 pm
|
|
| Thanks for the quick response. Having one bar is like having one pair of glasses. You just know someday you're going to regret it. |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 24 Mar 2009 1:58 pm
|
|
Robert,These are great custom made bars at a very affordable price,Stu http://www.bulletbars.com/
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 24 Mar 2009 2:00 pm
|
|
Stu beat me to the punch. These are great bars and "Free Shipping"!
Lee |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 24 Mar 2009 2:06 pm
|
|
Good enough for Lee...Good enough for me! 
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Bobby Snell
From:
Austin, Texas
|
Posted 24 Mar 2009 2:19 pm Avoiding Disaster is Less Expensive Than Gig Failure
|
|
On stage with me, there are always 2. (Search the Forum for all the "lost grip of my bar and it flew into the ladies' room" stories.) Along with some tools, extension/patch cords, extra volume pedal, etc. that stays in my truck, there's a 3d bar and picks. Just in case my gig bag grows legs or gets homesick and stays behind.
I also find it better to have extra bars/picks/VP for home rehearsal, so the gig equipment is packed and ready.
Only bring 1 guitar...but it's got 2 necks! |
|
|
|
Ross Shafer
From:
Petaluma, California
|
Posted 25 Mar 2009 9:32 am low price bar
|
|
Hi Robert,
I've got a hard chromed 7/8" PLanet Waves bar with about 2 hours on it that I'll sell to you for $20 shipped. It works and sounds fine,and even comes with a nifty little holder. After messing with it for a couple of hours I decided I like the 1" diameter I've been using better. I sent an email to you about this , but am not sure that it went through. You can email or PM me if interested.
All the best,
Ross Shafer |
|
|
|
Robert Harrington
From:
Connecticutt, USA
|
Posted 25 Mar 2009 9:45 am
|
|
| Thanks to all for your help. I have had the same bar for over twenty years so it is just a matter of time before I lose it. |
|
|
|
Charles Davidson
From:
Phenix City Alabama, USA
|
Posted 25 Mar 2009 10:35 am
|
|
If you live near a music store[guitar center] etc,most have bars such as Earnie Ball,etc. DYKBC.
_________________
Hard headed, opinionated old geezer. BAMA CHARLIE. GOD BLESS AMERICA. ANIMAL RIGHTS ACTIVIST. SUPPORT LIVE MUSIC ! |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 25 Mar 2009 6:19 pm
|
|
| Quote: |
| it is just a matter of time before I lose it. |
I think that can be said about all of us steelers! |
|
|
|
Edward Meisse
From:
Santa Rosa, California, USA
|
Posted 25 Mar 2009 9:35 pm
|
|
I haven't really lost it. I just can't remember where it is right now.
_________________
Amor vincit omnia |
|
|
|
