| Author |
Topic: Wanted - short barrel Grover tuner |
Jeff Lampert
From:
queens, new york city
|
Posted 19 Mar 2009 2:33 pm |
|
I have a stripped Grover tuner (where the screw-on nut goes into the hole) on the first string of the C6 neck. It has to be a short barrel because a regular barrel can't be installed since it doesn't clear the step between the two necks. Any help would be greatly appreciated. Also, is it possible to repair it? My e-mail is jr.lampert@verizon.net Thanks for your help. .. Jeff
_________________
www.mightyfinemusic.com/jeffsjazz.htm |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 19 Mar 2009 4:35 pm
|
|
| If it has a washer on it have you tried removing the washer to get you a titch more thread? |
|
|
|
Jeff Lampert
From:
queens, new york city
|
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 19 Mar 2009 10:17 pm
|
|
| What kind of guitar is it from Jeff? |
|
|
|
Curtis Mason
From:
Ohio, USA
|
Posted 20 Mar 2009 8:38 pm
|
|
It sounds like you're talking about the screw that holds the tuner key in place and not the nut that goes over the shaft...if this is the case, Instead of replacing the tuner assembly, have you tried to use the next size bigger screw? It may be hard to get started, but if it's already stripped, you may have no choice but to go to a bigger screw size.
_________________
Star Steel Guitar, G.D. Walker's Stereo Steel System, Hilton Volume pedal, TC-M1 Effects Processor, Peterson StroboFlip Tuner |
|
|
|
Curtis Mason
From:
Ohio, USA
|
Posted 20 Mar 2009 8:39 pm
|
|
Hey Jim,
What's a titch??
Good to see you and Karen in Texas.
_________________
Star Steel Guitar, G.D. Walker's Stereo Steel System, Hilton Volume pedal, TC-M1 Effects Processor, Peterson StroboFlip Tuner |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 20 Mar 2009 8:44 pm
|
|
| Think I'll play it safe on that one (for once)- good to see you and Amy as well, Curtis! |
|
|
|
