| Author |
Topic: Time to end Lawrence Pickup Confusion |
John Fabian
From:
Mesquite, Texas USA * R.I.P.
|
Posted 4 Mar 2009 6:04 am |
|
Got it?? |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 4 Mar 2009 6:26 am
|
|
Thanks John!
'Course, you know someone will ask about the 605 and 910, too!  |
|
|
|
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 4 Mar 2009 10:10 am
|
|
Hey John, you'd better clarify widemount vs. narrow mount, too.  |
|
|
|
Jon Light (deceased)
From:
Saugerties, NY
|
Posted 4 Mar 2009 12:38 pm
|
|
| I've got a more useful request-----provide the identifying guidelines to tell the diff between 710 and XR-16. |
|
|
|
John Fabian
From:
Mesquite, Texas USA * R.I.P.
|
Posted 4 Mar 2009 1:05 pm
|
|
Measuring the Inductance (Henry's) will give you the best results.
The 710 I measured was an old one that did not have a cover.
(Bill made them that way for a short period of time early on.)
XR-16 24-30K, 16H
710 16-20K, 12H
 |
|
|
|
Scott Swartz
From:
St. Louis, MO
|
Posted 4 Mar 2009 9:01 pm
|
|
Measurements for a 710 from 2004
measured on an ESI 250 DA impedance bridge
R = 26.4 KOhm
L = 13.4 H
Q = 2.8
_________________
Scott Swartz
Steeltronics - Steel Guitar Pickups
www.steeltronics.com |
|
|
|
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 4 Mar 2009 10:20 pm Don't forget the 910
|
|
I have a BL910 measuring @ 30kohms on a Fluke 77
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Dwight Lewis
From:
Huntsville, Alabama
|
Posted 4 Mar 2009 10:21 pm Don't forget the 910
|
|
I have a BL910 measuring @ 30kohms on a Fluke 77.It has the single pole pieces sticking up, but just as wide as the 710. Good bottom end and mid.
ijaash@yahoo.com
Dwight
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Ken Mizell
From:
Lakeland, Florida, 33809, USA
|
Posted 9 Mar 2009 3:58 pm
|
|
A picture is worth a thousand words. I had one of those 705's in a Sho-Bud 6139 in the early 80s. Great sounding pickup. I wish Bill was still making those. I just recently ordered a 710 narrow mount for my Mullen, directly from Bill Lawrence. It's in the mail.
_________________
Steeless.
Last edited by Ken Mizell on 12 Mar 2009 7:46 pm; edited 1 time in total |
|
|
|
Dennis Wallis
From:
Arkansas
|
Posted 11 Mar 2009 3:33 pm
|
|
| Bobbe Seymour sells the 705 that is supposed to be the same as the old ones. Check it out on his website. http://www.steelguitar.net/ |
|
|
|
Larry Hamilton
From:
Amarillo,Tx
|
Posted 12 Mar 2009 7:39 pm
|
|
I bought a used, what was advertised as a BL 710. It measured out 30k ohms. Regardles it sure sounds good in my guitar.
_________________
Keep pickin', Larry |
|
|
|
