| Author |
Topic: Pedal bar compleat for ShoBud D10 Professional |
Jack Mattison
From:
North Bend, Wa
|
Posted 19 Feb 2009 4:34 pm |
|
Where can I find, or who would have a pedal bar compleat for a D10 ShoBud "Professional"????. Mine is a little rugged looking, and no matter how much I polish it, it still looks pretty bad  . It works fine, and maybe thats all that really matters. Thanks guys............... Jack<><
_________________
Little Round Mound of Sound. D-10 8/5 ShoBud "The Professional" Pevey NV400. |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 19 Feb 2009 4:44 pm
|
|
| Your pedal bar can (more than likely) be salvaged, and made to look very good. It's probably oxidized and scratched so badly that mere polishing won't do the job. If it's in really rough shape, it'll require block sanding to get a smoother surface, and then it will polish up. Start with 180-grit, then 240-grit, then finish with 400 or 600-grit, and then it will polish up nicely with compound and a buffing wheel. |
|
|
|
Jack Mattison
From:
North Bend, Wa
|
Posted 19 Feb 2009 4:53 pm pedal bar
|
|
Thanks Donny......... This will probably do the trick, since like I said it works fine. I do have a friend who has a small machine shop at his home who could maybe help me. I can always replace the logo through Bobbe Seymour. Thanks again
_________________
Little Round Mound of Sound. D-10 8/5 ShoBud "The Professional" Pevey NV400. |
|
|
|
